Sort all UM2+ profiles

This will make it easier to modify these profiles in the future.

resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg

@@ -11,11 +11,12 @@ quality_type = high
 setting_version = 2
 
 [values]
-layer_height = 0.06
-wall_thickness = 0.88
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 30
-speed_layer_0 = =round(speed_print * 30 / 30)
 cool_min_layer_time = 5
 cool_min_speed = 10
+infill_sparse_density = 22
+layer_height = 0.06
+speed_layer_0 = =round(speed_print * 30 / 30)
+speed_print = 30
+top_bottom_thickness = 0.72
+wall_thickness = 0.88
+

resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg

@@ -11,14 +11,15 @@ quality_type = fast
 setting_version = 2
 
 [values]
-layer_height = 0.15
-wall_thickness = 0.7
-top_bottom_thickness = 0.75
+cool_min_layer_time = 5
+cool_min_speed = 10
 infill_sparse_density = 18
-speed_print = 60
+layer_height = 0.15
 speed_layer_0 = =round(speed_print * 30 / 60)
-speed_wall = 50
+speed_print = 60
 speed_topbottom = 30
 speed_travel = 150
-cool_min_layer_time = 5
-cool_min_speed = 10
+speed_wall = 50
+top_bottom_thickness = 0.75
+wall_thickness = 0.7
+

resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg

@@ -11,12 +11,13 @@ quality_type = high
 setting_version = 2
 
 [values]
-layer_height = 0.06
-wall_thickness = 1.05
-top_bottom_thickness = 0.72
+cool_min_layer_time = 5
+cool_min_speed = 10
 infill_sparse_density = 22
-speed_print = 50
+layer_height = 0.06
 speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
 speed_topbottom = 20
-cool_min_layer_time = 5
-cool_min_speed = 10
+top_bottom_thickness = 0.72
+wall_thickness = 1.05
+

resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg

@@ -11,12 +11,13 @@ quality_type = normal
 setting_version = 2
 
 [values]
-layer_height = 0.1
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
+cool_min_layer_time = 5
+cool_min_speed = 10
 infill_sparse_density = 20
-speed_print = 50
+layer_height = 0.1
 speed_layer_0 = =round(speed_print * 30 / 50)
+speed_print = 50
 speed_topbottom = 20
-cool_min_layer_time = 5
-cool_min_speed = 10
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+

resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg

@@ -11,14 +11,15 @@ quality_type = normal
 setting_version = 2
 
 [values]
-layer_height = 0.15
-wall_thickness = 1.59
-top_bottom_thickness = 1.2
+cool_min_layer_time = 5
+cool_min_speed = 10
 infill_sparse_density = 20
-speed_print = 55
+layer_height = 0.15
 speed_layer_0 = =round(speed_print * 30 / 55)
+speed_print = 55
+speed_topbottom = 20
 speed_wall = 40
 speed_wall_0 = 25
-speed_topbottom = 20
-cool_min_layer_time = 5
-cool_min_speed = 10
+top_bottom_thickness = 1.2
+wall_thickness = 1.59
+

resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg

@@ -11,12 +11,13 @@ quality_type = fast
 setting_version = 2
 
 [values]
-layer_height = 0.2
-wall_thickness = 2.1
-top_bottom_thickness = 1.2
+cool_min_layer_time = 5
+cool_min_speed = 10
 infill_sparse_density = 20
-speed_print = 40
+layer_height = 0.2
 speed_layer_0 = =round(speed_print * 30 / 40)
+speed_print = 40
 speed_wall_0 = 25
-cool_min_layer_time = 5
-cool_min_speed = 10
+top_bottom_thickness = 1.2
+wall_thickness = 2.1
+

resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg

@@ -11,15 +11,14 @@ quality_type = high
 setting_version = 2
 
 [values]
-layer_height = 0.06
-wall_thickness = 0.88
-top_bottom_thickness = 0.72
-infill_sparse_density = 22
-speed_print = 30
-speed_layer_0 = =round(speed_print * 30 / 30)
-cool_min_layer_time = 3
 cool_fan_speed_min = =cool_fan_speed * 0.2
-cool_min_speed = 10
+cool_min_layer_time = 3
 cool_min_layer_time_fan_speed_max = 15
-
+cool_min_speed = 10
+infill_sparse_density = 22
+layer_height = 0.06
+speed_layer_0 = =round(speed_print * 30 / 30)
+speed_print = 30
+top_bottom_thickness = 0.72
+wall_thickness = 0.88
 

resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg

@@ -11,17 +11,17 @@ quality_type = fast
 setting_version = 2
 
 [values]
-layer_height = 0.15
-wall_thickness = 0.7
-top_bottom_thickness = 0.75
+cool_fan_speed_min = =cool_fan_speed * 0.2
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
 infill_sparse_density = 18
-speed_print = 55
+layer_height = 0.15
 speed_layer_0 = =round(speed_print * 30 / 55)
-speed_wall = 40
+speed_print = 55
 speed_topbottom = 30
 speed_travel = 150
-cool_min_layer_time = 3
-cool_fan_speed_min = =cool_fan_speed * 0.2
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
+speed_wall = 40
+top_bottom_thickness = 0.75
+wall_thickness = 0.7
 

resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg

@@ -11,15 +11,15 @@ quality_type = high
 setting_version = 2
 
 [values]
-layer_height = 0.06
-wall_thickness = 1.05
-top_bottom_thickness = 0.72
+cool_fan_speed_min = =cool_fan_speed * 0.2
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
 infill_sparse_density = 22
-speed_print = 45
+layer_height = 0.06
 speed_layer_0 = =round(speed_print * 30 / 45)
+speed_print = 45
 speed_wall = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = =cool_fan_speed * 0.2
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
+top_bottom_thickness = 0.72
+wall_thickness = 1.05
 

resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg

@@ -11,14 +11,15 @@ quality_type = normal
 setting_version = 2
 
 [values]
-layer_height = 0.1
-wall_thickness = 1.05
-top_bottom_thickness = 0.8
+cool_fan_speed_min = =cool_fan_speed * 0.2
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
 infill_sparse_density = 20
-speed_print = 45
+layer_height = 0.1
 speed_layer_0 = =round(speed_print * 30 / 45)
+speed_print = 45
 speed_wall = 30
-cool_min_layer_time = 3
-cool_fan_speed_min = =cool_fan_speed * 0.2
-cool_min_speed = 10
-cool_min_layer_time_fan_speed_max = 15
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+