Also use different speeds and coast volumes for UME+ variants

I've discussed this with Paul and he confirms that they should also be different for Extended just like not-Extended.

Contributes to issue CURA-1278.

resources/variants/ultimaker2_extended_plus_0.25.cfg

@@ -8,4 +8,9 @@ author = Ultimaker
 
 [values]
 machine_nozzle_size = 0.25
-machine_nozzle_tip_outer_diameter = 0.8
+machine_nozzle_tip_outer_diameter = 0.8
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+speed_wall = round(speed_print / 1.2, 1)
+speed_wall_0 = 1 if speed_wall < 5 else (speed_wall - 5)
+speed_topbottom = round(speed_print / 1.5, 1)

resources/variants/ultimaker2_extended_plus_0.4.cfg

@@ -8,4 +8,7 @@ author = Ultimaker
 
 [values]
 machine_nozzle_size = 0.4
-machine_nozzle_tip_outer_diameter = 1.05
+machine_nozzle_tip_outer_diameter = 1.05
+speed_wall = round(speed_print / 1.25, 1)
+speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = round(speed_print / 2.25, 1)

resources/variants/ultimaker2_extended_plus_0.6.cfg

@@ -8,4 +8,8 @@ author = Ultimaker
 
 [values]
 machine_nozzle_size = 0.6
-machine_nozzle_tip_outer_diameter = 1.25
+machine_nozzle_tip_outer_diameter = 1.25
+coasting_volume = 1.36
+speed_wall = round(speed_print * 4 / 3, 1)
+speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = round(speed_print / 2, 1)

resources/variants/ultimaker2_extended_plus_0.8.cfg

@@ -8,4 +8,8 @@ author = Ultimaker
 
 [values]
 machine_nozzle_size = 0.8
-machine_nozzle_tip_outer_diameter = 1.35
+machine_nozzle_tip_outer_diameter = 1.35
+coasting_volume = 3.22
+speed_wall = round(speed_print * 4 / 3, 1)
+speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = round(speed_print / 2, 1)