Merge pull request #17336 from Ultimaker/PP-400-enable-ABS-R-support-for-1C-extruder

- ABS-R print profiles for ABS-R with the 1C extruder

resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = ultimaker_methodx
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_sparse_density = 100
+

resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+definition = ultimaker_methodxl
+name = Solid
+version = 4
+
+[metadata]
+intent_category = solid
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 22
+type = intent
+variant = 1C
+
+[values]
+infill_sparse_density = 100
+

resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg

@@ -0,0 +1,42 @@
+[general]
+definition = ultimaker_methodx
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+cool_fan_enabled = False
+raft_airgap = 0.3
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg

@@ -0,0 +1,44 @@
+[general]
+definition = ultimaker_methodxl
+name = Fast
+version = 4
+
+[metadata]
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 1C
+weight = -2
+
+[values]
+build_volume_temperature = 85
+cool_fan_enabled = False
+default_material_bed_temperature = 95
+raft_airgap = 0.3
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+