Remove infill_overlap_mm from Nylon profiles

This is the result of this week's profile updates from our material tests.

resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -14,7 +14,6 @@ adhesion_type = raft
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-infill_overlap_mm = 0.05
 line_width = =machine_nozzle_size
 material_print_temperature = 255
 material_standby_temperature = 100

resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -14,7 +14,6 @@ adhesion_type = raft
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-infill_overlap_mm = 0.05
 line_width = =machine_nozzle_size
 material_print_temperature = 250
 material_standby_temperature = 100

resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg

@@ -14,7 +14,6 @@ adhesion_type = raft
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
 infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-infill_overlap_mm = 0.05
 line_width = =machine_nozzle_size
 material_standby_temperature = 100
 ooze_shield_angle = 40

resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -14,7 +14,6 @@ adhesion_type = raft
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
 infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-infill_overlap_mm = 0.05
 line_width = =machine_nozzle_size
 material_standby_temperature = 100
 ooze_shield_angle = 40