Remove overrides of support interface speed/accel/jerk

This is a settings updates from the Materials team.

resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg

@@ -11,11 +11,8 @@ material = generic_pva_ultimaker3_BB_0.4
 setting_version = 1
 
 [values]
-acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500)
-jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 20
-speed_support_interface = =math.ceil(speed_support * 20 / 25)
 support_interface_height = 0.8

resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg

@@ -11,11 +11,8 @@ material = generic_pva_ultimaker3_BB_0.4
 setting_version = 1
 
 [values]
-acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500)
-jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 15
 support_interface_height = 0.8
-speed_support_interface = =math.ceil(speed_support * 20 / 25)

resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg

@@ -11,10 +11,7 @@ material = generic_pva_ultimaker3_BB_0.4
 setting_version = 1
 
 [values]
-acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500)
-jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
 material_standby_temperature = 100
 prime_tower_enable = False
-speed_support_interface = =math.ceil(speed_support * 20 / 25)
 support_infill_rate = 25
 support_interface_height = 0.8

resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg

@@ -11,10 +11,7 @@ material = generic_pva_ultimaker3_BB_0.4
 setting_version = 1
 
 [values]
-acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500)
-jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
 material_standby_temperature = 100
+prime_tower_enable = False
 support_infill_rate = 25
 support_interface_height = 0.8
-prime_tower_enable = False
-speed_support_interface = =math.ceil(speed_support * 20 / 25)