|
|
@@ -7,66 +7,64 @@
|
|
|
"file_formats": "text/x-gcode",
|
|
|
"manufacturer": "Renkforce",
|
|
|
"visible": true,
|
|
|
- "machine_extruder_trains":
|
|
|
- {
|
|
|
+ "machine_extruder_trains": {
|
|
|
"0": "renkforce_rf100_xl_extruder_0"
|
|
|
}
|
|
|
},
|
|
|
-
|
|
|
"overrides": {
|
|
|
"adhesion_type": {
|
|
|
"default_value": "skirt"
|
|
|
},
|
|
|
"bottom_thickness": {
|
|
|
- "value": "0.6"
|
|
|
+ "value": 0.6
|
|
|
},
|
|
|
"brim_width": {
|
|
|
- "value": "3.0"
|
|
|
+ "value": 3.0
|
|
|
},
|
|
|
"cool_fan_enabled": {
|
|
|
- "value": "True"
|
|
|
+ "value": true
|
|
|
},
|
|
|
"cool_fan_full_at_height": {
|
|
|
- "value": "0.5"
|
|
|
+ "value": 0.5
|
|
|
},
|
|
|
"cool_fan_speed_max": {
|
|
|
- "value": "100.0"
|
|
|
+ "value": 100.0
|
|
|
},
|
|
|
"cool_fan_speed_min": {
|
|
|
- "value": "100.0"
|
|
|
+ "value": 100.0
|
|
|
},
|
|
|
"cool_lift_head": {
|
|
|
- "value": "True"
|
|
|
+ "value": true
|
|
|
},
|
|
|
"cool_min_layer_time": {
|
|
|
- "value": "1.0"
|
|
|
+ "value": 1.0
|
|
|
},
|
|
|
"cool_min_speed": {
|
|
|
- "value": "5.0"
|
|
|
+ "value": 5.0
|
|
|
},
|
|
|
"infill_before_walls": {
|
|
|
- "value": "True"
|
|
|
+ "value": true
|
|
|
},
|
|
|
"infill_line_width": {
|
|
|
- "value": "0.6"
|
|
|
+ "value": 0.6
|
|
|
},
|
|
|
"infill_overlap": {
|
|
|
- "value": "15.0"
|
|
|
+ "value": 15.0
|
|
|
},
|
|
|
"infill_sparse_density": {
|
|
|
- "value": "26.0"
|
|
|
+ "value": 26.0
|
|
|
},
|
|
|
"ironing_enabled": {
|
|
|
- "value": "True"
|
|
|
+ "value": true
|
|
|
},
|
|
|
"layer_0_z_overlap": {
|
|
|
- "value": "0.11"
|
|
|
+ "value": 0.11
|
|
|
},
|
|
|
"layer_height_0": {
|
|
|
- "value": "0.3"
|
|
|
+ "value": 0.3
|
|
|
},
|
|
|
"machine_depth": {
|
|
|
- "value": "200"
|
|
|
+ "value": 200
|
|
|
},
|
|
|
"machine_end_gcode": {
|
|
|
"default_value": ";End GCode\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-4 F300 ;move Z up a bit and retract filament even more\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG0 Z{machine_height} F1800 ;move the platform all the way down\nG28 X0 Y0 F1800 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM117 Done"
|
|
|
@@ -75,10 +73,10 @@
|
|
|
"default_value": "RepRap (Marlin/Sprinter)"
|
|
|
},
|
|
|
"machine_heated_bed": {
|
|
|
- "default_value": "true"
|
|
|
+ "default_value": true
|
|
|
},
|
|
|
"machine_height": {
|
|
|
- "value": "200"
|
|
|
+ "value": 200
|
|
|
},
|
|
|
"machine_name": {
|
|
|
"default_value": "Renkforce RF100 XL"
|
|
|
@@ -87,112 +85,112 @@
|
|
|
"default_value": ";Sliced at: {day} {date} {time}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG1 Z5.0 F1800 ;move Z to 5mm\nG28 X0 Y0 F1800 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstop\nG92 E0 ;zero the extruded length\nG1 F200 E6.0 ;extrude 6.0mm of feed stock to build pressure\nG1 Z5.0 F300 ;move the platform down 5mm\nG92 E0 ;zero the extruded length again\nG1 F1800\n;Put printing message on LCD screen\nM117 Printing..."
|
|
|
},
|
|
|
"machine_width": {
|
|
|
- "value": "200"
|
|
|
+ "value": 200
|
|
|
},
|
|
|
"material_bed_temperature": {
|
|
|
- "value": "70"
|
|
|
+ "value": 70
|
|
|
},
|
|
|
"material_print_temperature": {
|
|
|
- "value": "210.0"
|
|
|
+ "value": 210.0
|
|
|
},
|
|
|
"ooze_shield_enabled": {
|
|
|
- "value": "True"
|
|
|
+ "value": true
|
|
|
},
|
|
|
"raft_airgap": {
|
|
|
- "value": "0.33"
|
|
|
+ "value": 0.33
|
|
|
},
|
|
|
"raft_base_line_spacing": {
|
|
|
- "value": "3.0"
|
|
|
+ "value": 3.0
|
|
|
},
|
|
|
"raft_base_line_width": {
|
|
|
- "value": "1.0"
|
|
|
+ "value": 1.0
|
|
|
},
|
|
|
"raft_base_thickness": {
|
|
|
- "value": "0.3"
|
|
|
+ "value": 0.3
|
|
|
},
|
|
|
"raft_interface_line_spacing": {
|
|
|
- "value": "3.0"
|
|
|
+ "value": 3.0
|
|
|
},
|
|
|
"raft_interface_line_width": {
|
|
|
- "value": "0.4"
|
|
|
+ "value": 0.4
|
|
|
},
|
|
|
"raft_interface_thickness": {
|
|
|
- "value": "0.27"
|
|
|
+ "value": 0.27
|
|
|
},
|
|
|
"raft_margin": {
|
|
|
- "value": "6.0"
|
|
|
+ "value": 6.0
|
|
|
},
|
|
|
"raft_speed": {
|
|
|
- "value": "20.0"
|
|
|
+ "value": 20.0
|
|
|
},
|
|
|
"raft_surface_layers": {
|
|
|
- "value": "2"
|
|
|
+ "value": 2
|
|
|
},
|
|
|
"raft_surface_line_spacing": {
|
|
|
- "value": "0.4"
|
|
|
+ "value": 0.4
|
|
|
},
|
|
|
"raft_surface_line_width": {
|
|
|
- "value": "0.4"
|
|
|
+ "value": 0.4
|
|
|
},
|
|
|
"raft_surface_thickness": {
|
|
|
- "value": "0.1"
|
|
|
+ "value": 0.1
|
|
|
},
|
|
|
"retraction_amount": {
|
|
|
- "value": "5.0"
|
|
|
+ "value": 5.0
|
|
|
},
|
|
|
"retraction_combing": {
|
|
|
- "value": "'all'"
|
|
|
+ "value": "all"
|
|
|
},
|
|
|
"retraction_enable": {
|
|
|
- "value": "True"
|
|
|
+ "value": true
|
|
|
},
|
|
|
"retraction_min_travel": {
|
|
|
- "value": "1.5"
|
|
|
+ "value": 1.5
|
|
|
},
|
|
|
"skin_overlap": {
|
|
|
- "value": "15.0"
|
|
|
+ "value": 15.0
|
|
|
},
|
|
|
"skirt_brim_minimal_length": {
|
|
|
- "value": "150.0"
|
|
|
+ "value": 150.0
|
|
|
},
|
|
|
"skirt_gap": {
|
|
|
- "value": "3.0"
|
|
|
+ "value": 3.0
|
|
|
},
|
|
|
"skirt_line_count": {
|
|
|
- "value": "3"
|
|
|
+ "value": 3
|
|
|
},
|
|
|
"speed_infill": {
|
|
|
- "value": "50.0"
|
|
|
+ "value": 50.0
|
|
|
},
|
|
|
"speed_layer_0": {
|
|
|
- "value": "15.0"
|
|
|
+ "value": 15.0
|
|
|
},
|
|
|
"speed_print": {
|
|
|
- "value": "50.0"
|
|
|
+ "value": 50.0
|
|
|
},
|
|
|
"speed_topbottom": {
|
|
|
- "value": "30.0"
|
|
|
+ "value": 30.0
|
|
|
},
|
|
|
"speed_travel": {
|
|
|
- "value": "50.0"
|
|
|
+ "value": 50.0
|
|
|
},
|
|
|
"speed_wall_0": {
|
|
|
- "value": "25.0"
|
|
|
+ "value": 25.0
|
|
|
},
|
|
|
"speed_wall_x": {
|
|
|
- "value": "35.0"
|
|
|
+ "value": 35.0
|
|
|
},
|
|
|
"support_angle": {
|
|
|
- "value": "60.0"
|
|
|
+ "value": 60.0
|
|
|
},
|
|
|
"support_enable": {
|
|
|
- "value": "False"
|
|
|
+ "value": false
|
|
|
},
|
|
|
"support_infill_rate": {
|
|
|
"value": "15 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 15"
|
|
|
},
|
|
|
"support_line_width": {
|
|
|
- "value": "0.6"
|
|
|
+ "value": 0.6
|
|
|
},
|
|
|
"support_pattern": {
|
|
|
"default_value": "lines"
|
|
|
@@ -201,16 +199,16 @@
|
|
|
"default_value": "everywhere"
|
|
|
},
|
|
|
"support_xy_distance": {
|
|
|
- "value": "0.7"
|
|
|
+ "value": 0.7
|
|
|
},
|
|
|
"support_z_distance": {
|
|
|
- "value": "0.35"
|
|
|
+ "value": 0.35
|
|
|
},
|
|
|
"top_bottom_thickness": {
|
|
|
- "value": "0.8"
|
|
|
+ "value": 0.8
|
|
|
},
|
|
|
"wall_thickness": {
|
|
|
- "value": "0.8"
|
|
|
+ "value": 0.8
|
|
|
}
|
|
|
}
|
|
|
-}
|
|
|
+}
|
Michel Wilhelm