Update cartesio_0.8.inst.cfg

resources/variants/cartesio_0.8.inst.cfg

@@ -10,56 +10,3 @@ type = variant
 [values]
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 1.05
-
-infill_line_width = 0.9
-
-wall_thickness = 2.4
-top_bottom_thickness = =0.8 if layer_height < 0.3 else (layer_height * 3)
-wall_0_inset = -0.05
-fill_perimeter_gaps = nowhere
-travel_compensate_overlapping_walls_enabled = 
-
-infill_sparse_density = 24
-infill_pattern = grid
-
-material_print_temperature_layer_0 = =round(material_print_temperature)
-material_initial_print_temperature = =round(material_print_temperature)
-material_diameter = 1.75
-retraction_amount = 1.5
-retraction_prime_speed = =round(retraction_speed / 5)
-retraction_min_travel = =round(line_width * 10)
-switch_extruder_retraction_amount = 2
-switch_extruder_retraction_speeds = =round(retraction_speed)
-switch_extruder_prime_speed = =round(retraction_prime_speed)
-
-speed_print = =50 if layer_height < 0.4 else 30
-speed_infill = =round(speed_print)
-speed_layer_0 = =round(speed_print / 5 * 4)
-speed_wall = =round(speed_print / 2)
-speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
-speed_topbottom = =round(speed_print / 5 * 4)
-speed_slowdown_layers = 1
-speed_travel = =round(speed_print if magic_spiralize else 150)
-speed_travel_layer_0 = =round(speed_travel)
-speed_support_interface = =round(speed_topbottom)
-
-retraction_combing = off
-retraction_hop_enabled = True
-retraction_hop = 1
-
-cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time)
-cool_min_layer_time = 20
-
-support_z_distance = 0
-support_xy_distance = 0.5
-support_join_distance = 10
-support_interface_enable = True
-
-adhesion_type = skirt
-skirt_gap = 0.5
-skirt_brim_minimal_length = 50
-
-coasting_enable = True
-coasting_volume = 0.1
-coasting_min_volume = 0.17
-coasting_speed = 90