Improve PC-ABS-FR Self Support

Reduce the print speed and increase the
 flow for PC-ABS-FR self support.  This is
 intended to prevent under-extrusion and improve
 adhesion.

PP-550

resources/quality/ultimaker_methodx/um_methodx_1c_um-pc-abs-fr-175_0.2mm.inst.cfg

@@ -31,7 +31,7 @@ speed_layer_0 = =speed_print * 7/24
 speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
-speed_support = =speed_print * 5/6
+speed_support = =speed_print * 1/2
 speed_support_bottom = 25
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
@@ -50,7 +50,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1

resources/quality/ultimaker_methodx/um_methodx_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg

@@ -31,7 +31,7 @@ speed_layer_0 = =speed_print * 7/24
 speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
-speed_support = =speed_print * 5/6
+speed_support = =speed_print * 1/2
 speed_support_bottom = 25
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
@@ -50,7 +50,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1

resources/quality/ultimaker_methodx/um_methodx_labs_um-pc-abs-fr-175_0.2mm.inst.cfg

@@ -31,7 +31,7 @@ speed_layer_0 = =speed_print * 7/24
 speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
-speed_support = =speed_print * 5/6
+speed_support = =speed_print * 1/2
 speed_support_bottom = 25
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
@@ -50,7 +50,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pc-abs-fr-175_0.2mm.inst.cfg

@@ -30,7 +30,7 @@ speed_layer_0 = =speed_print * 7/24
 speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
-speed_support = =speed_print * 5/6
+speed_support = =speed_print * 1/2
 speed_support_bottom = 25
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
@@ -49,7 +49,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1

resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-pc-abs-fr-175_0.2mm.inst.cfg

@@ -30,7 +30,7 @@ speed_layer_0 = =speed_print * 7/24
 speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
-speed_support = =speed_print * 5/6
+speed_support = =speed_print * 1/2
 speed_support_bottom = 25
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
@@ -49,7 +49,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1

resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pc-abs-fr-175_0.2mm.inst.cfg

@@ -30,7 +30,7 @@ speed_layer_0 = =speed_print * 7/24
 speed_prime_tower = =speed_print * 1/4
 speed_print = 120.0
 speed_roofing = =speed_print * 13/24
-speed_support = =speed_print * 5/6
+speed_support = =speed_print * 1/2
 speed_support_bottom = 25
 speed_support_interface = =speed_print * 15/24
 speed_topbottom = =speed_print * 11/24
@@ -49,7 +49,7 @@ support_interface_density = 85
 support_interface_enable = True
 support_interface_pattern = zigzag
 support_line_width = 0.3
-support_material_flow = 95
+support_material_flow = 100
 support_pattern = zigzag
 support_roof_density = 85
 support_roof_wall_count = 1