Update variant profiles to use the right syntax for formulas

Contributes to CURA-1278

resources/variants/ultimaker2_extended_plus_0.25.inst.cfg

@@ -12,6 +12,6 @@ machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.8
 coasting_volume = 0.1
 coasting_min_volume = 0.17
-speed_wall = round(speed_print / 1.2, 1)
-speed_wall_0 = 1 if speed_wall < 5 else (speed_wall - 5)
-speed_topbottom = round(speed_print / 1.5, 1)
+speed_wall = =round(speed_print / 1.2, 1)
+speed_wall_0 = =1 if speed_wall < 5 else (speed_wall - 5)
+speed_topbottom = =round(speed_print / 1.5, 1)

resources/variants/ultimaker2_extended_plus_0.4.inst.cfg

@@ -10,6 +10,6 @@ type = variant
 [values]
 machine_nozzle_size = 0.4
 machine_nozzle_tip_outer_diameter = 1.05
-speed_wall = round(speed_print / 1.25, 1)
-speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
-speed_topbottom = round(speed_print / 2.25, 1)
+speed_wall = =round(speed_print / 1.25, 1)
+speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = =round(speed_print / 2.25, 1)

resources/variants/ultimaker2_extended_plus_0.6.inst.cfg

@@ -11,6 +11,6 @@ type = variant
 machine_nozzle_size = 0.6
 machine_nozzle_tip_outer_diameter = 1.25
 coasting_volume = 1.36
-speed_wall = round(speed_print * 4 / 3, 1)
-speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
-speed_topbottom = round(speed_print / 2, 1)
+speed_wall = =round(speed_print * 4 / 3, 1)
+speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = =round(speed_print / 2, 1)

resources/variants/ultimaker2_extended_plus_0.8.inst.cfg

@@ -11,6 +11,6 @@ type = variant
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 1.35
 coasting_volume = 3.22
-speed_wall = round(speed_print * 4 / 3, 1)
-speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
-speed_topbottom = round(speed_print / 2, 1)
+speed_wall = =round(speed_print * 4 / 3, 1)
+speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = =round(speed_print / 2, 1)

resources/variants/ultimaker2_plus_0.25.inst.cfg

@@ -12,6 +12,6 @@ machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.8
 coasting_volume = 0.1
 coasting_min_volume = 0.17
-speed_wall = round(speed_print / 1.2, 1)
-speed_wall_0 = 1 if speed_wall < 5 else (speed_wall - 5)
-speed_topbottom = round(speed_print / 1.5, 1)
+speed_wall = =round(speed_print / 1.2, 1)
+speed_wall_0 = =1 if speed_wall < 5 else (speed_wall - 5)
+speed_topbottom = =round(speed_print / 1.5, 1)

resources/variants/ultimaker2_plus_0.4.inst.cfg

@@ -10,6 +10,6 @@ type = variant
 [values]
 machine_nozzle_size = 0.4
 machine_nozzle_tip_outer_diameter = 1.05
-speed_wall = round(speed_print / 1.25, 1)
-speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
-speed_topbottom = round(speed_print / 2.25, 1)
+speed_wall = =round(speed_print / 1.25, 1)
+speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = =round(speed_print / 2.25, 1)

resources/variants/ultimaker2_plus_0.6.inst.cfg

@@ -11,6 +11,6 @@ type = variant
 machine_nozzle_size = 0.6
 machine_nozzle_tip_outer_diameter = 1.25
 coasting_volume = 1.36
-speed_wall = round(speed_print * 4 / 3, 1)
-speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
-speed_topbottom = round(speed_print / 2, 1)
+speed_wall = =round(speed_print * 4 / 3, 1)
+speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = =round(speed_print / 2, 1)

resources/variants/ultimaker2_plus_0.8.inst.cfg

@@ -11,6 +11,6 @@ type = variant
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 1.35
 coasting_volume = 3.22
-speed_wall = round(speed_print * 4 / 3, 1)
-speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
-speed_topbottom = round(speed_print / 2, 1)
+speed_wall = =round(speed_print * 4 / 3, 1)
+speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = =round(speed_print / 2, 1)