|
|
@@ -645,7 +645,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
|
|
|
|
|
|
# Only check for mistakes if there is material length information.
|
|
|
if print_information.materialLengths:
|
|
|
- # Check if print cores / materials are loaded at all. Any failure in these results in an Error.
|
|
|
+ # Check if PrintCores / materials are loaded at all. Any failure in these results in an Error.
|
|
|
for index in range(0, self._num_extruders):
|
|
|
if index < len(print_information.materialLengths) and print_information.materialLengths[index] != 0:
|
|
|
if self._json_printer_state["heads"][0]["extruders"][index]["hotend"]["id"] == "":
|
|
|
@@ -677,7 +677,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
|
|
|
if variant:
|
|
|
if variant.getName() != core_name:
|
|
|
Logger.log("w", "Extruder %s has a different Cartridge (%s) as Cura (%s)", index + 1, core_name, variant.getName())
|
|
|
- warnings.append(i18n_catalog.i18nc("@label", "Different print core (Cura: {0}, Printer: {1}) selected for extruder {2}".format(variant.getName(), core_name, index + 1)))
|
|
|
+ warnings.append(i18n_catalog.i18nc("@label", "Different PrintCore (Cura: {0}, Printer: {1}) selected for extruder {2}".format(variant.getName(), core_name, index + 1)))
|
|
|
|
|
|
material = extruder_manager.getExtruderStack(index).findContainer({"type": "material"})
|
|
|
if material:
|
|
|
@@ -699,7 +699,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
|
|
|
is_offset_calibrated = True
|
|
|
|
|
|
if not is_offset_calibrated:
|
|
|
- warnings.append(i18n_catalog.i18nc("@label", "Print core {0} is not properly calibrated. XY calibration needs to be performed on the printer.").format(index + 1))
|
|
|
+ warnings.append(i18n_catalog.i18nc("@label", "PrintCore {0} is not properly calibrated. XY calibration needs to be performed on the printer.").format(index + 1))
|
|
|
else:
|
|
|
Logger.log("w", "There was no material usage found. No check to match used material with machine is done.")
|
|
|
|
|
|
@@ -1176,7 +1176,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
|
|
|
i18n_catalog.i18nc("@label",
|
|
|
"Would you like to use your current printer configuration in Cura?"),
|
|
|
i18n_catalog.i18nc("@label",
|
|
|
- "The print cores and/or materials on your printer differ from those within your current project. For the best result, always slice for the print cores and materials that are inserted in your printer."),
|
|
|
+ "The PrintCores and/or materials on your printer differ from those within your current project. For the best result, always slice for the PrintCores and materials that are inserted in your printer."),
|
|
|
buttons=QMessageBox.Yes + QMessageBox.No,
|
|
|
icon=QMessageBox.Question,
|
|
|
callback=callback
|
Jaime van Kessel