Remove deleted setting from profiles

resources/quality/elegoo_neptune_2/elegoo_neptune_2_draft.inst.cfg

@@ -32,7 +32,6 @@ speed_travel_layer_0 = 125.0
 speed_wall_x = 50.0
 top_bottom_thickness = =layer_height_0+layer_height*3
 top_layers = =0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))
-travel_compensate_overlapping_walls_0_enabled = True
 wall_0_material_flow = 95
 wall_0_wipe_dist = 0.4
 wall_thickness = 1.2

resources/quality/elegoo_neptune_2/elegoo_neptune_2_fine.inst.cfg

@@ -28,7 +28,6 @@ speed_layer_0 = 25.0
 speed_travel_layer_0 = 125.0
 speed_wall_x = 50.0
 top_bottom_thickness = 1
-travel_compensate_overlapping_walls_0_enabled = True
 wall_0_material_flow = 95
 wall_0_wipe_dist = 0.4
 wall_thickness = 1.2

resources/quality/elegoo_neptune_2/elegoo_neptune_2_normal.inst.cfg

@@ -35,7 +35,6 @@ speed_travel_layer_0 = 125.0
 speed_wall_x = 50.0
 support_xy_distance = 0.2
 top_bottom_thickness = 1
-travel_compensate_overlapping_walls_0_enabled = True
 wall_0_inset = 0.2
 wall_0_material_flow = 95
 wall_0_wipe_dist = 0.4

resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_draft.inst.cfg

@@ -32,7 +32,6 @@ speed_travel_layer_0 = 125.0
 speed_wall_x = 50.0
 top_bottom_thickness = =layer_height_0+layer_height*3
 top_layers = =0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))
-travel_compensate_overlapping_walls_0_enabled = True
 wall_0_material_flow = 95
 wall_0_wipe_dist = 0.4
 wall_thickness = 1.2

resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_fine.inst.cfg

@@ -28,7 +28,6 @@ speed_layer_0 = 25.0
 speed_travel_layer_0 = 125.0
 speed_wall_x = 50.0
 top_bottom_thickness = 1
-travel_compensate_overlapping_walls_0_enabled = True
 wall_0_material_flow = 95
 wall_0_wipe_dist = 0.4
 wall_thickness = 1.2

resources/quality/elegoo_neptune_2D/elegoo_neptune_2D_normal.inst.cfg

@@ -35,7 +35,6 @@ speed_travel_layer_0 = 125.0
 speed_wall_x = 50.0
 support_xy_distance = 0.2
 top_bottom_thickness = 1
-travel_compensate_overlapping_walls_0_enabled = True
 wall_0_inset = 0.2
 wall_0_material_flow = 95
 wall_0_wipe_dist = 0.4