|
|
@@ -3,7 +3,7 @@
|
|
|
"name": "MP Mini Delta",
|
|
|
"inherits": "fdmprinter",
|
|
|
"metadata": {
|
|
|
- "author": "MPMD Facebook Group",
|
|
|
+ "author": "MPMD V1 Facebook Group",
|
|
|
"manufacturer": "Monoprice",
|
|
|
"file_formats": "text/x-gcode",
|
|
|
"platform": "mp_mini_delta_platform.3mf",
|
|
|
@@ -25,7 +25,7 @@
|
|
|
"overrides": {
|
|
|
"machine_start_gcode":
|
|
|
{
|
|
|
- "default_value": ";MPMD Basic Calibration Tutorial: \n; https://www.thingiverse.com/thing:3892011 \n; \n; If you want to put calibration values in your \n; Start Gcode, put them here. \n; \n;If on stock firmware, at minimum, consider adding \n;M665 R here since there is a firmware bug. \n; \n; Calibration part ends here \n; \nG90 ; switch to absolute positioning \nG92 E0 ; reset extrusion distance \nG1 E20 F200 ; purge 20mm of filament to prime nozzle. \nG92 E0 ; reset extrusion distance \nG4 S5 ; Pause for 5 seconds to allow time for removing extruded filament \nG28 ; start from home position \nG1 E-6 F900 ; retract 6mm of filament before starting the bed leveling process \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for removing extruded filament \nG29 P2 Z0.28 ; Auto-level ; ADJUST Z higher or lower to set first layer height. Start with 0.02 adjustments. \nG1 Z30 ; raise Z 30mm to prepare for priming the nozzle \nG1 E5 F200 ; extrude 5mm of filament to help prime the nozzle just prior to the start of the print \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for cleaning the nozzle and build plate if needed "
|
|
|
+ "default_value": ";MPMD V1 Basic Calibration Tutorial: \n; https://www.thingiverse.com/thing:3892011 \n; \n; If you want to put calibration values in your \n; Start Gcode, put them here. \n; \n;If on stock firmware, at minimum, consider adding \n;M665 R here since there is a firmware bug. \n; \n; Calibration part ends here \n; \nG90 ; switch to absolute positioning \nG92 E0 ; reset extrusion distance \nG1 E20 F200 ; purge 20mm of filament to prime nozzle. \nG92 E0 ; reset extrusion distance \nG4 S5 ; Pause for 5 seconds to allow time for removing extruded filament \nG28 ; start from home position \nG1 E-6 F900 ; retract 6mm of filament before starting the bed leveling process \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for removing extruded filament \nG29 P2 Z0.28 ; Auto-level ; ADJUST Z higher or lower to set first layer height. Start with 0.02 adjustments. \nG1 Z30 ; raise Z 30mm to prepare for priming the nozzle \nG1 E5 F200 ; extrude 5mm of filament to help prime the nozzle just prior to the start of the print \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for cleaning the nozzle and build plate if needed "
|
|
|
},
|
|
|
"machine_end_gcode":
|
|
|
{
|
|
|
@@ -47,9 +47,9 @@
|
|
|
"default_value": 0.21
|
|
|
},
|
|
|
"material_bed_temperature": { "value": 40 },
|
|
|
- "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
|
|
|
- "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
|
|
|
- "material_bed_temperature_layer_0": { "value": "material_bed_temperature + 5" },
|
|
|
+ "line_width": { "value": "round(machine_nozzle_size, 2)" },
|
|
|
+ "material_print_temperature_layer_0": { "value": "material_print_temperature" },
|
|
|
+ "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },
|
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
|
"machine_max_feedrate_x": { "default_value": 150 },
|
|
|
"machine_max_feedrate_y": { "default_value": 150 },
|
PurpleHullPeas