Optimise profiles for 0.8mm cores

Sample testing confirms that these are equal to their originals. Nylon, PLA and PVA were already optimised, but ABS and CPE weren't. Now all are optimised except some 0.4mm core profiles. I'll see to those next. Note that the filament flow compensation setting is still wrong in these profiles (it was wrong in the original profiles as well).

Contributes to issue CURA-3650.

resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg

@@ -1,96 +1,20 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = draft
-material = generic_abs_ultimaker3_AA_0.8
-weight = -2
-
-[values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 7
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_before_walls = False
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 90
-material_print_temperature = =default_material_print_temperature + 25
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_size = 16
-prime_tower_wipe_enabled = True
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 5
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 50
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 50)
-speed_wall = =math.ceil(speed_print * 40 / 50)
-speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_abs_ultimaker3_AA_0.8
+weight = -2
+
+[values]
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 25
+material_standby_temperature = 100
+speed_equalize_flow_enabled = False
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg

@@ -1,96 +1,21 @@
-[general]
-version = 2
-name = Superdraft Print
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = superdraft
-material = generic_abs_ultimaker3_AA_0.8
-weight = -4
-
-[values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 7
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_before_walls = False
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.4
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 90
-material_print_temperature = =default_material_print_temperature + 30
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_size = 16
-prime_tower_wipe_enabled = True
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 5
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 50
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 50)
-speed_wall = =math.ceil(speed_print * 40 / 50)
-speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+[general]
+version = 2
+name = Superdraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_abs_ultimaker3_AA_0.8
+weight = -4
+
+[values]
+layer_height = 0.4
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 30
+material_standby_temperature = 100
+speed_equalize_flow_enabled = False
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg

@@ -1,96 +1,21 @@
-[general]
-version = 2
-name = Verydraft Print
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = verydraft
-material = generic_abs_ultimaker3_AA_0.8
-weight = -3
-
-[values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 7
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_before_walls = False
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.3
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 90
-material_print_temperature = =default_material_print_temperature + 27
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_size = 16
-prime_tower_wipe_enabled = True
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 5
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 50
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 50)
-speed_wall = =math.ceil(speed_print * 40 / 50)
-speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+[general]
+version = 2
+name = Verydraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_abs_ultimaker3_AA_0.8
+weight = -3
+
+[values]
+layer_height = 0.3
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 27
+material_standby_temperature = 100
+speed_equalize_flow_enabled = False
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg

@@ -1,96 +1,20 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = draft
-material = generic_cpe_ultimaker3_AA_0.8
-weight = -2
-
-[values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 15
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 7
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_before_walls = False
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 80
-material_print_temperature = =default_material_print_temperature + 15
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_size = 16
-prime_tower_wipe_enabled = True
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 5
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 40
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 25 / 40)
-speed_wall = =math.ceil(speed_print * 30 / 40)
-speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_cpe_ultimaker3_AA_0.8
+weight = -2
+
+[values]
+brim_width = 15
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 15
+material_standby_temperature = 100
+speed_equalize_flow_enabled = False
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg

@@ -1,96 +1,22 @@
-[general]
-version = 2
-name = Superdraft Print
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = superdraft
-material = generic_cpe_ultimaker3_AA_0.8
-weight = -4
-
-[values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 15
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 7
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_before_walls = False
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.4
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 80
-material_print_temperature = =default_material_print_temperature + 20
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_size = 16
-prime_tower_wipe_enabled = True
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 5
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 45
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 45)
-speed_wall = =math.ceil(speed_print * 40 / 45)
-speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+[general]
+version = 2
+name = Superdraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_cpe_ultimaker3_AA_0.8
+weight = -2
+
+[values]
+brim_width = 15
+layer_height = 0.4
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 20
+material_standby_temperature = 100
+speed_equalize_flow_enabled = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 30 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg

@@ -1,96 +1,21 @@
-[general]
-version = 2
-name = Verydraft Print
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = verydraft
-material = generic_cpe_ultimaker3_AA_0.8
-weight = -3
-
-[values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 15
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 7
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_before_walls = False
-infill_line_width = =round(line_width * 0.6 / 0.7, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
-jerk_wall_x = =jerk_wall
-layer_height = 0.3
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 80
-material_print_temperature = =default_material_print_temperature + 17
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_size = 16
-prime_tower_wipe_enabled = True
-retract_at_layer_change = True
-retraction_amount = 6.5
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 5
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 40
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 25 / 40)
-speed_wall = =math.ceil(speed_print * 30 / 40)
-speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_retraction_amount = 16.5
-top_bottom_thickness = 1.4
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =wall_line_width
-wall_thickness = 2
+[general]
+version = 2
+name = Verydraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_cpe_ultimaker3_AA_0.8
+weight = -2
+
+[values]
+brim_width = 15
+layer_height = 0.3
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 17
+material_standby_temperature = 100
+speed_equalize_flow_enabled = False
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg

@@ -10,17 +10,27 @@ material = generic_nylon_ultimaker3_AA_0.8
 weight = -2
 
 [values]
+brim_line_count = 7
 brim_width = 8.0
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 10
 infill_before_walls = True
-infill_pattern = triangles
+infill_line_width = =line_width
 machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
+ooze_shield_angle = 40
+prime_tower_size = 15
+raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_jerk = =jerk_layer_0
+raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
 

resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg

@@ -7,21 +7,31 @@ definition = ultimaker3
 type = quality
 quality_type = superdraft
 material = generic_nylon_ultimaker3_AA_0.8
-weight = -2
+weight = -4
 
 [values]
+brim_line_count = 7
 brim_width = 8.0
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 10
 infill_before_walls = True
-infill_pattern = triangles
+infill_line_width = =line_width
 layer_height = 0.4
 machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
+ooze_shield_angle = 40
+prime_tower_size = 15
+raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_jerk = =jerk_layer_0
+raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
 

resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg

@@ -7,21 +7,31 @@ definition = ultimaker3
 type = quality
 quality_type = verydraft
 material = generic_nylon_ultimaker3_AA_0.8
-weight = -2
+weight = -3
 
 [values]
+brim_line_count = 7
 brim_width = 8.0
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 10
 infill_before_walls = True
-infill_pattern = triangles
+infill_line_width = =line_width
 layer_height = 0.3
 machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
+ooze_shield_angle = 40
+prime_tower_size = 15
+raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_jerk = =jerk_layer_0
+raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
 

resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg

@@ -7,28 +7,30 @@ definition = ultimaker3
 type = quality
 quality_type = draft
 material = generic_pla_ultimaker3_AA_0.8
-weight = 0
+weight = -2
 
 [values]
-brim_line_count = =math.ceil(brim_width / skirt_brim_line_width)
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 gradual_infill_steps = 4
 infill_line_width = =round(line_width * 0.535 / 0.75, 2)
+infill_pattern = cubic
 infill_sparse_density = 80
 line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
-ooze_shield_angle = 60
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-raft_margin = 15
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+prime_tower_size = 15
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
 wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x