|
|
@@ -31,8 +31,6 @@
|
|
|
"machine_depth": { "default_value": 200 },
|
|
|
"machine_height": { "default_value": 501 },
|
|
|
"machine_start_gcode": { "default_value": ";Start Gcode for {machine_name}\n;Author: Dagoma\n;Sliced: {date} {time}\n;Estimated print time: {print_time}\n;Print speed: {speed_print}mm/s\n;Layer height: {layer_height}mm\n;Wall thickness: {wall_thickness}mm\n;Infill density: {infill_sparse_density}%\n;Infill pattern: {infill_pattern}\n;Support: {support_enable}\n;Print temperature: {material_print_temperature}°C\n;Flow: {material_flow}%\n;Retraction amount: {retraction_amount}mm\n;Retraction speed: {retraction_retract_speed}mm/s\nG90 ;absolute positioning\nM190 S{material_bed_temperature_layer_0};\nM109 S140;\nG1 F200 E-1.0\nM106 S255 ;Activating layers fans\nG28 ;Homing\nG29 ;Calibration\nM107 ;Off Ventilateur\nM109 S{material_print_temperature_layer_0} ;Temperature for the first layer only\nG92 E0 ;Zero the extruded length again\nG1 X0 Y-105 Z1 F3000\nG1 F{speed_travel}\nM117 Printing...\n" },
|
|
|
- "machine_end_gcode": { "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\nM104 S0\nM107 ;stop fan\nM140 S0 ;heated bed heater off (if you have it)\nG92 E0\nG1 E-55 F4600\nG27\nG90 ; Absolute positioning\nT0" },
|
|
|
- "prime_tower_position_x": { "value": 17.5 },
|
|
|
- "prime_tower_position_y": { "value": 60 }
|
|
|
+ "machine_end_gcode": { "default_value": ";End Gcode for {machine_name}\n;Author: Dagoma\nM104 S0\nM107 ;stop fan\nM140 S0 ;heated bed heater off (if you have it)\nG92 E0\nG1 E-55 F4600\nG27\nG90 ; Absolute positioning\nT0" }
|
|
|
}
|
|
|
}
|
0r31