Updated to reference speed_travel macro

resources/definitions/wanhao_d4s.def.json

@@ -39,10 +39,10 @@
       "default_value": "RepRap (Marlin/Sprinter)"
     },
     "machine_start_gcode": {
-      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{travel_speed} \n ;Put printing message on LCD screen\n M117 Printing..."
+      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
     },
     "machine_end_gcode": {
-      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
+      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
     }
   }
 }

resources/definitions/wanhao_d6.def.json

@@ -42,10 +42,10 @@
       "default_value": "RepRap (Marlin/Sprinter)"
     },
     "machine_start_gcode": {
-      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{travel_speed} \n ;Put printing message on LCD screen\n M117 Printing..."
+      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
     },
     "machine_end_gcode": {
-      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
+      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
     }
   }
 }

resources/definitions/wanhao_d6_plus.def.json

@@ -39,10 +39,10 @@
       "default_value": "RepRap (Marlin/Sprinter)"
     },
     "machine_start_gcode": {
-      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{travel_speed} \n ;Put printing message on LCD screen\n M117 Printing..."
+      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
     },
     "machine_end_gcode": {
-      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
+      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
     }
   }
 }

resources/definitions/wanhao_duplicator5S.def.json

@@ -42,10 +42,10 @@
       "default_value": "RepRap (Marlin/Sprinter)"
     },
     "machine_start_gcode": {
-      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{travel_speed} \n ;Put printing message on LCD screen\n M117 Printing..."
+      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
     },
     "machine_end_gcode": {
-      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
+      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
     }
   }
 }

resources/definitions/wanhao_duplicator5Smini.def.json

@@ -39,10 +39,10 @@
       "default_value": "RepRap (Marlin/Sprinter)"
     },
     "machine_start_gcode": {
-      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{travel_speed} \n ;Put printing message on LCD screen\n M117 Printing..."
+      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
     },
     "machine_end_gcode": {
-      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
+      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
     }
   }
 }

resources/definitions/wanhao_i3.def.json

@@ -39,10 +39,10 @@
       "default_value": "RepRap (Marlin/Sprinter)"
     },
     "machine_start_gcode": {
-      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{travel_speed} \n ;Put printing message on LCD screen\n M117 Printing..."
+      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
     },
     "machine_end_gcode": {
-      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
+      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
     }
   }
 }

resources/definitions/wanhao_i3mini.def.json

@@ -39,10 +39,10 @@
       "default_value": "RepRap (Marlin/Sprinter)"
     },
     "machine_start_gcode": {
-      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{travel_speed} \n ;Put printing message on LCD screen\n M117 Printing..."
+      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
     },
     "machine_end_gcode": {
-      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
+      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
     }
   }
 }

resources/definitions/wanhao_i3plus.def.json

@@ -39,10 +39,10 @@
       "default_value": "RepRap (Marlin/Sprinter)"
     },
     "machine_start_gcode": {
-      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{travel_speed} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{travel_speed} \n ;Put printing message on LCD screen\n M117 Printing..."
+      "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E6 ;extrude 6 mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
     },
     "machine_end_gcode": {
-      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
+      "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
     }
   }
 }