Remove BAM qualities

resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg

@@ -1,32 +0,0 @@
-[general]
-version = 2
-name = Fast
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = draft
-material = generic_bam_ultimaker3_AA_0.4
-weight = -2
-setting_version = 3
-
-[values]
-cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
-cool_fan_speed_max = =cool_fan_speed
-machine_nozzle_cool_down_speed = 0.75
-machine_nozzle_heat_up_speed = 1.6
-material_print_temperature = =230
-material_standby_temperature = 100
-prime_tower_enable = False
-skin_overlap = 20
-speed_layer_0 = 20
-speed_topbottom = =math.ceil(speed_print * 35 / 70)
-speed_wall = =math.ceil(speed_print * 50 / 70)
-speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
-top_bottom_thickness = 1
-wall_thickness = 1
-support_interface_enable = True
-support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
-support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
-support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height

resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg

@@ -1,32 +0,0 @@
-[general]
-version = 2
-name = Normal
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = fast
-material = generic_bam_ultimaker3_AA_0.4
-weight = -1
-setting_version = 3
-
-[values]
-default_material_print_temperature = 225
-cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
-cool_fan_speed_max = =cool_fan_speed
-machine_nozzle_cool_down_speed = 0.75
-machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
-prime_tower_enable = False
-speed_print = 80
-speed_layer_0 = 20
-speed_topbottom = =math.ceil(speed_print * 30 / 80)
-speed_wall = =math.ceil(speed_print * 40 / 80)
-speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-top_bottom_thickness = 1
-wall_thickness = 1
-support_interface_enable = True
-support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
-support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
-support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height

resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg

@@ -1,30 +0,0 @@
-[general]
-version = 2
-name = Fine
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = normal
-material = generic_bam_ultimaker3_AA_0.4
-weight = 0
-setting_version = 3
-
-[values]
-default_material_print_temperature = 225
-cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
-cool_fan_speed_max = =cool_fan_speed
-cool_min_speed = 7
-machine_nozzle_cool_down_speed = 0.75
-machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
-prime_tower_enable = False
-skin_overlap = 10
-speed_layer_0 = 20
-top_bottom_thickness = 1
-wall_thickness = 1
-support_interface_enable = True
-support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
-support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
-support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height