|
|
@@ -3406,6 +3406,47 @@
|
|
|
"enabled": "support_enable",
|
|
|
"settable_per_mesh": true
|
|
|
},
|
|
|
+ "support_infill_sparse_thickness":
|
|
|
+ {
|
|
|
+ "label": "Support Infill Layer Thickness",
|
|
|
+ "description": "The thickness per layer of support infill material. This value should always be a multiple of the layer height and is otherwise rounded.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0.1,
|
|
|
+ "minimum_value": "resolveOrValue('layer_height')",
|
|
|
+ "maximum_value_warning": "0.75 * machine_nozzle_size",
|
|
|
+ "maximum_value": "resolveOrValue('layer_height') * 8",
|
|
|
+ "value": "resolveOrValue('layer_height')",
|
|
|
+ "enabled": "support_infill_rate > 0",
|
|
|
+ "limit_to_extruder": "support_infill_extruder_nr",
|
|
|
+ "settable_per_mesh": false
|
|
|
+ },
|
|
|
+ "gradual_support_infill_steps":
|
|
|
+ {
|
|
|
+ "label": "Gradual Support Infill Steps",
|
|
|
+ "description": "Number of times to reduce the support infill density by half when getting further below top surfaces. Areas which are closer to top surfaces get a higher density, up to the Support Infill Density.",
|
|
|
+ "default_value": 0,
|
|
|
+ "type": "int",
|
|
|
+ "minimum_value": "0",
|
|
|
+ "maximum_value_warning": "5",
|
|
|
+ "maximum_value": "999999 if support_line_distance == 0 else (20 - math.log(support_line_distance) / math.log(2))",
|
|
|
+ "enabled": "support_enable",
|
|
|
+ "limit_to_extruder": "support_infill_extruder_nr",
|
|
|
+ "settable_per_mesh": false
|
|
|
+ },
|
|
|
+ "gradual_support_infill_step_height":
|
|
|
+ {
|
|
|
+ "label": "Gradual Support Infill Step Height",
|
|
|
+ "description": "The height of support infill of a given density before switching to half the density.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 1.5,
|
|
|
+ "minimum_value": "0.0001",
|
|
|
+ "minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
|
|
+ "enabled": "support_enable and gradual_support_infill_steps > 0",
|
|
|
+ "limit_to_extruder": "support_infill_extruder_nr",
|
|
|
+ "settable_per_mesh": false
|
|
|
+ },
|
|
|
"support_interface_enable":
|
|
|
{
|
|
|
"label": "Enable Support Interface",
|
Lipu Fei