Add profiles for 0.8mm ABS and CPE

These profiles are not optimised yet. I'm not allowed to optimise them since there seem to be bugs in the optimisation.

resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg

@@ -0,0 +1,96 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_abs_ultimaker3_AA_0.8
+weight = -2
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 7
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 7
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = False
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.2
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.875
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 90
+material_print_temperature = =default_material_print_temperature + 25
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_prime_tower = =speed_topbottom
+speed_print = 50
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_ABS_Not_Supported_Quality.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 2
-name = Not Supported
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = normal
-material = generic_abs_ultimaker3_AA_0.8
-weight = 0
-supported = False
-
-[values]

resources/quality/ultimaker3/um3_aa0.8_ABS_Not_Supported_Superdraft_Quality.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 2
-name = Not Supported
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = superdraft
-material = generic_abs_ultimaker3_AA_0.8
-weight = 0
-supported = False
-
-[values]

resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg

@@ -0,0 +1,96 @@
+[general]
+version = 2
+name = Superdraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_abs_ultimaker3_AA_0.8
+weight = -4
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 7
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 7
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = False
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.4
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.875
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 90
+material_print_temperature = =default_material_print_temperature + 30
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_prime_tower = =speed_topbottom
+speed_print = 50
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg

@@ -0,0 +1,96 @@
+[general]
+version = 2
+name = Verydraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_abs_ultimaker3_AA_0.8
+weight = -3
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 7
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 7
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = False
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.3
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.875
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 90
+material_print_temperature = =default_material_print_temperature + 27
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_prime_tower = =speed_topbottom
+speed_print = 50
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg

@@ -0,0 +1,96 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_cpe_ultimaker3_AA_0.8
+weight = -2
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 15
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 7
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = False
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.2
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.875
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 80
+material_print_temperature = =default_material_print_temperature + 15
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_prime_tower = =speed_topbottom
+speed_print = 40
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_CPE_Not_Supported_Quality.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 2
-name = Not Supported
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = normal
-material = generic_cpe_ultimaker3_AA_0.8
-weight = 0
-supported = False
-
-[values]

resources/quality/ultimaker3/um3_aa0.8_CPE_Not_Supported_Superdraft_Quality.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-version = 2
-name = Not Supported
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = superdraft
-material = generic_cpe_ultimaker3_AA_0.8
-weight = 0
-supported = False
-
-[values]

resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg

@@ -0,0 +1,96 @@
+[general]
+version = 2
+name = Superdraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_cpe_ultimaker3_AA_0.8
+weight = -4
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 15
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 7
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = False
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.4
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.875
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 80
+material_print_temperature = =default_material_print_temperature + 20
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_prime_tower = =speed_topbottom
+speed_print = 45
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 30 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2

resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg

@@ -0,0 +1,96 @@
+[general]
+version = 2
+name = Verydraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_cpe_ultimaker3_AA_0.8
+weight = -3
+
+[values]
+acceleration_enabled = True
+acceleration_infill = =acceleration_print
+acceleration_layer_0 = =acceleration_topbottom
+acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_print = 4000
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_infill = =acceleration_support
+acceleration_support_interface = =acceleration_topbottom
+acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
+acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
+acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
+acceleration_wall_x = =acceleration_wall
+adhesion_type = brim
+brim_width = 15
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_fan_speed = 7
+cool_fan_speed_max = 100
+cool_min_layer_time = 5
+cool_min_speed = 5
+infill_before_walls = False
+infill_line_width = =round(line_width * 0.6 / 0.7, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_sparse_density = 20
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_topbottom
+jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
+jerk_print = 25
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_infill = =jerk_support
+jerk_support_interface = =jerk_topbottom
+jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
+jerk_wall = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
+jerk_wall_x = =jerk_wall
+layer_height = 0.3
+layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+line_width = =machine_nozzle_size * 0.875
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature = 80
+material_print_temperature = =default_material_print_temperature + 17
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_prime_tower = =speed_topbottom
+speed_print = 40
+speed_support = =speed_wall_0
+speed_support_interface = =speed_topbottom
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+speed_wall_x = =speed_wall
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_xy_distance = =wall_line_width_0 * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_z_distance = =layer_height * 2
+switch_extruder_retraction_amount = 16.5
+top_bottom_thickness = 1.4
+travel_avoid_distance = 3
+travel_compensate_overlapping_walls_enabled = True
+wall_0_inset = 0
+wall_line_width_x = =wall_line_width
+wall_thickness = 2