|
|
@@ -5127,6 +5127,18 @@
|
|
|
}
|
|
|
}
|
|
|
},
|
|
|
+ "support_infill_density_multiplier_initial_layer":
|
|
|
+ {
|
|
|
+ "label": "Support Infill Density Multiplier Initial Layer",
|
|
|
+ "description": "Multiplier for the infill on the initial layers of the support. Increasing this may help for bed adhesion.",
|
|
|
+ "type": "int",
|
|
|
+ "minimum_value": "1",
|
|
|
+ "default_value": 1,
|
|
|
+ "enabled": "support_enable or support_meshes_present",
|
|
|
+ "limit_to_extruder": "support_extruder_nr_layer_0",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true
|
|
|
+ },
|
|
|
"support_infill_angles":
|
|
|
{
|
|
|
"label": "Support Infill Line Directions",
|
|
|
@@ -6395,6 +6407,38 @@
|
|
|
"settable_per_extruder": true,
|
|
|
"limit_to_extruder": "raft_base_extruder_nr"
|
|
|
},
|
|
|
+ "raft_base_infill_overlap":
|
|
|
+ {
|
|
|
+ "label": "Raft Base Infill Overlap Percentage",
|
|
|
+ "description": "The amount of overlap between the infill and the walls of the raft base, as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill.",
|
|
|
+ "unit": "%",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0,
|
|
|
+ "minimum_value_warning": "-50",
|
|
|
+ "maximum_value_warning": "100",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_base_extruder_nr",
|
|
|
+ "children":
|
|
|
+ {
|
|
|
+ "raft_base_infill_overlap_mm":
|
|
|
+ {
|
|
|
+ "label": "Raft Base Infill Overlap",
|
|
|
+ "description": "The amount of overlap between the infill and the walls of the raft base. A slight overlap allows the walls to connect firmly to the infill.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0.0,
|
|
|
+ "minimum_value_warning": "-0.5 * machine_nozzle_size",
|
|
|
+ "maximum_value_warning": "machine_nozzle_size",
|
|
|
+ "value": "raft_base_line_width * raft_base_infill_overlap / 100",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_base_extruder_nr"
|
|
|
+ }
|
|
|
+ }
|
|
|
+ },
|
|
|
"raft_interface_layers":
|
|
|
{
|
|
|
"label": "Raft Middle Layers",
|
|
|
@@ -6456,6 +6500,54 @@
|
|
|
"settable_per_extruder": true,
|
|
|
"limit_to_extruder": "raft_interface_extruder_nr"
|
|
|
},
|
|
|
+ "raft_interface_z_offset":
|
|
|
+ {
|
|
|
+ "label": "Raft Interface Z Offset",
|
|
|
+ "description": "When printing the first layer of the raft interface, translate by this offset to customize the adhesion between base and interface. A negative offset should improve the adhesion.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0.0,
|
|
|
+ "minimum_value_warning": "-raft_interface_thickness / 2",
|
|
|
+ "minimum_value": "-raft_interface_thickness",
|
|
|
+ "maximum_value_warning": "raft_interface_thickness / 2",
|
|
|
+ "maximum_value": "raft_interface_thickness",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_interface_layers > 0",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_interface_extruder_nr"
|
|
|
+ },
|
|
|
+ "raft_interface_infill_overlap":
|
|
|
+ {
|
|
|
+ "label": "Raft Interface Infill Overlap Percentage",
|
|
|
+ "description": "The amount of overlap between the infill and the walls of the raft interface, as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill.",
|
|
|
+ "unit": "%",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0,
|
|
|
+ "minimum_value_warning": "-50",
|
|
|
+ "maximum_value_warning": "100",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_interface_extruder_nr",
|
|
|
+ "children":
|
|
|
+ {
|
|
|
+ "raft_interface_infill_overlap_mm":
|
|
|
+ {
|
|
|
+ "label": "Raft Interface Infill Overlap",
|
|
|
+ "description": "The amount of overlap between the infill and the walls of the raft interface. A slight overlap allows the walls to connect firmly to the infill.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0.0,
|
|
|
+ "minimum_value_warning": "-0.5 * machine_nozzle_size",
|
|
|
+ "maximum_value_warning": "machine_nozzle_size",
|
|
|
+ "value": "raft_interface_line_width * raft_interface_infill_overlap / 100",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_interface_extruder_nr"
|
|
|
+ }
|
|
|
+ }
|
|
|
+ },
|
|
|
"raft_surface_layers":
|
|
|
{
|
|
|
"label": "Raft Top Layers",
|
|
|
@@ -6517,6 +6609,22 @@
|
|
|
"settable_per_extruder": true,
|
|
|
"limit_to_extruder": "raft_surface_extruder_nr"
|
|
|
},
|
|
|
+ "raft_surface_z_offset":
|
|
|
+ {
|
|
|
+ "label": "Raft Surface Z Offset",
|
|
|
+ "description": "When printing the first layer of the raft surface, translate by this offset to customize the adhesion between interface and surface. A negative offset should improve the adhesion.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0.0,
|
|
|
+ "minimum_value_warning": "-raft_surface_thickness / 2",
|
|
|
+ "minimum_value": "-raft_surface_thickness",
|
|
|
+ "maximum_value_warning": "raft_surface_thickness / 2",
|
|
|
+ "maximum_value": "raft_surface_thickness",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_surface_extruder_nr"
|
|
|
+ },
|
|
|
"raft_surface_monotonic":
|
|
|
{
|
|
|
"label": "Monotonic Raft Top Surface Order",
|
|
|
@@ -6529,6 +6637,38 @@
|
|
|
"settable_per_extruder": true,
|
|
|
"limit_to_extruder": "raft_surface_extruder_nr"
|
|
|
},
|
|
|
+ "raft_surface_infill_overlap":
|
|
|
+ {
|
|
|
+ "label": "Raft Surface Infill Overlap Percentage",
|
|
|
+ "description": "The amount of overlap between the infill and the walls of the raft surface, as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill.",
|
|
|
+ "unit": "%",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0,
|
|
|
+ "minimum_value_warning": "-50",
|
|
|
+ "maximum_value_warning": "100",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_surface_extruder_nr",
|
|
|
+ "children":
|
|
|
+ {
|
|
|
+ "raft_surface_infill_overlap_mm":
|
|
|
+ {
|
|
|
+ "label": "Raft Surface Infill Overlap",
|
|
|
+ "description": "The amount of overlap between the infill and the walls of the raft surface. A slight overlap allows the walls to connect firmly to the infill.",
|
|
|
+ "unit": "mm",
|
|
|
+ "type": "float",
|
|
|
+ "default_value": 0.0,
|
|
|
+ "minimum_value_warning": "-0.5 * machine_nozzle_size",
|
|
|
+ "maximum_value_warning": "machine_nozzle_size",
|
|
|
+ "value": "raft_surface_line_width * raft_surface_infill_overlap / 100",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_surface_extruder_nr"
|
|
|
+ }
|
|
|
+ }
|
|
|
+ },
|
|
|
"raft_wall_count":
|
|
|
{
|
|
|
"label": "Raft Wall Count",
|
|
|
@@ -6831,6 +6971,63 @@
|
|
|
"limit_to_extruder": "raft_surface_extruder_nr"
|
|
|
}
|
|
|
}
|
|
|
+ },
|
|
|
+ "raft_flow":
|
|
|
+ {
|
|
|
+ "label": "Raft Flow",
|
|
|
+ "description": "The amount of material, relative to a normal extrusion line, to extrude during raft printing. Having an increased flow may improve adhesion and raft structural strength.",
|
|
|
+ "type": "float",
|
|
|
+ "unit": "%",
|
|
|
+ "default_value": 100.0,
|
|
|
+ "minimum_value": "10",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "children":
|
|
|
+ {
|
|
|
+ "raft_base_flow":
|
|
|
+ {
|
|
|
+ "label": "Raft Base Flow",
|
|
|
+ "description": "The amount of material, relative to a normal extrusion line, to extrude during raft base printing. Having an increased flow may improve adhesion and raft structural strength.",
|
|
|
+ "type": "float",
|
|
|
+ "unit": "%",
|
|
|
+ "default_value": 100.0,
|
|
|
+ "value": "raft_flow",
|
|
|
+ "minimum_value": "10",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_base_extruder_nr"
|
|
|
+ },
|
|
|
+ "raft_interface_flow":
|
|
|
+ {
|
|
|
+ "label": "Raft Interface Flow",
|
|
|
+ "description": "The amount of material, relative to a normal extrusion line, to extrude during raft interface printing. Having an increased flow may improve adhesion and raft structural strength.",
|
|
|
+ "type": "float",
|
|
|
+ "unit": "%",
|
|
|
+ "default_value": 100.0,
|
|
|
+ "value": "raft_flow",
|
|
|
+ "minimum_value": "10",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_interface_extruder_nr"
|
|
|
+ },
|
|
|
+ "raft_surface_flow":
|
|
|
+ {
|
|
|
+ "label": "Raft Surface Flow",
|
|
|
+ "description": "The amount of material, relative to a normal extrusion line, to extrude during raft surface printing. Having an increased flow may improve adhesion and raft structural strength.",
|
|
|
+ "type": "float",
|
|
|
+ "unit": "%",
|
|
|
+ "default_value": 100.0,
|
|
|
+ "value": "raft_flow",
|
|
|
+ "minimum_value": "10",
|
|
|
+ "enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
|
|
+ "settable_per_mesh": false,
|
|
|
+ "settable_per_extruder": true,
|
|
|
+ "limit_to_extruder": "raft_surface_extruder_nr"
|
|
|
+ }
|
|
|
+ }
|
|
|
}
|
|
|
}
|
|
|
},
|
HellAholic