Update translation templates

These templates were generated using 'make extract-messages' on the 2.6 branch at commit 3be6526be3c550862451747041516a453c2a9878.

Contributes to issue CURA-3885.

resources/i18n/fdmextruder.def.json.pot

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2017-03-27 17:27+0000\n"
+"POT-Creation-Date: 2017-05-30 15:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -31,6 +31,18 @@ msgctxt "extruder_nr description"
 msgid "The extruder train used for printing. This is used in multi-extrusion."
 msgstr ""
 
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_size label"
+msgid "Nozzle Diameter"
+msgstr ""
+
+#: fdmextruder.def.json
+msgctxt "machine_nozzle_size description"
+msgid ""
+"The inner diameter of the nozzle. Change this setting when using a non-"
+"standard nozzle size."
+msgstr ""
+
 #: fdmextruder.def.json
 msgctxt "machine_nozzle_offset_x label"
 msgid "Nozzle X Offset"

resources/i18n/fdmprinter.def.json.pot

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2017-03-27 17:27+0000\n"
+"POT-Creation-Date: 2017-05-30 15:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -724,7 +724,27 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_interface_line_width description"
-msgid "Width of a single support interface line."
+msgid "Width of a single line of support roof or floor."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_line_width label"
+msgid "Support Roof Line Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_line_width description"
+msgid "Width of a single support roof line."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_line_width label"
+msgid "Support Floor Line Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_line_width description"
+msgid "Width of a single support floor line."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1194,16 +1214,65 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "sub_div_rad_mult label"
-msgid "Cubic Subdivision Radius"
+msgctxt "spaghetti_infill_enabled label"
+msgid "Spaghetti Infill"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "sub_div_rad_mult description"
+msgctxt "spaghetti_infill_enabled description"
 msgid ""
-"A multiplier on the radius from the center of each cube to check for the "
-"boundary of the model, as to decide whether this cube should be subdivided. "
-"Larger values lead to more subdivisions, i.e. more small cubes."
+"Print the infill every so often, so that the filament will curl up "
+"chaotically inside the object. This reduces print time, but the behaviour is "
+"rather unpredictable."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_max_infill_angle label"
+msgid "Spaghetti Maximum Infill Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_max_infill_angle description"
+msgid ""
+"The maximum angle w.r.t. the Z axis of the inside of the print for areas "
+"which are to be filled with spaghetti infill afterwards. Lowering this value "
+"causes more angled parts in your model to be filled on each layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_max_height label"
+msgid "Spaghetti Infill Maximum Height"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_max_height description"
+msgid ""
+"The maximum height of inside space which can be combined and filled from the "
+"top."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_inset label"
+msgid "Spaghetti Inset"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_inset description"
+msgid ""
+"The offset from the walls from where the spaghetti infill will be printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_flow label"
+msgid "Spaghetti Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "spaghetti_flow description"
+msgid ""
+"Adjusts the density of the spaghetti infill. Note that the Infill Density "
+"only controls the line spacing of the filling pattern, not the amount of "
+"extrusion for spaghetti infill."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1358,26 +1427,26 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "expand_upper_skins label"
-msgid "Expand Upper Skins"
+msgid "Expand Top Skins Into Infill"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "expand_upper_skins description"
 msgid ""
-"Expand upper skin areas (areas with air above) so that they support infill "
+"Expand the top skin areas (areas with air above) so that they support infill "
 "above."
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "expand_lower_skins label"
-msgid "Expand Lower Skins"
+msgid "Expand Bottom Skins Into Infill"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "expand_lower_skins description"
 msgid ""
-"Expand lower skin areas (areas with air below) so that they are anchored by "
-"the infill layers above and below."
+"Expand the bottom skin areas (areas with air below) so that they are "
+"anchored by the infill layers above and below."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1857,8 +1926,32 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "speed_support_interface description"
 msgid ""
-"The speed at which the roofs and bottoms of support are printed. Printing "
-"the them at lower speeds can improve overhang quality."
+"The speed at which the roofs and floors of support are printed. Printing "
+"them at lower speeds can improve overhang quality."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "speed_support_roof label"
+msgid "Support Roof Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "speed_support_roof description"
+msgid ""
+"The speed at which the roofs of support are printed. Printing them at lower "
+"speeds can improve overhang quality."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "speed_support_bottom label"
+msgid "Support Floor Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "speed_support_bottom description"
+msgid ""
+"The speed at which the floor of support is printed. Printing it at lower "
+"speed can improve adhesion of support on top of your model."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2085,8 +2178,32 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "acceleration_support_interface description"
 msgid ""
-"The acceleration with which the roofs and bottoms of support are printed. "
-"Printing them at lower accelerations can improve overhang quality."
+"The acceleration with which the roofs and floors of support are printed. "
+"Printing them at lower acceleration can improve overhang quality."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_support_roof label"
+msgid "Support Roof Acceleration"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_support_roof description"
+msgid ""
+"The acceleration with which the roofs of support are printed. Printing them "
+"at lower acceleration can improve overhang quality."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_support_bottom label"
+msgid "Support Floor Acceleration"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_support_bottom description"
+msgid ""
+"The acceleration with which the floors of support are printed. Printing them "
+"at lower acceleration can improve adhesion of support on top of your model."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2264,8 +2381,32 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "jerk_support_interface description"
 msgid ""
-"The maximum instantaneous velocity change with which the roofs and bottoms "
-"of support are printed."
+"The maximum instantaneous velocity change with which the roofs and floors of "
+"support are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_support_roof label"
+msgid "Support Roof Jerk"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_support_roof description"
+msgid ""
+"The maximum instantaneous velocity change with which the roofs of support "
+"are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_support_bottom label"
+msgid "Support Floor Jerk"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_support_bottom description"
+msgid ""
+"The maximum instantaneous velocity change with which the floors of support "
+"are printed."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2659,14 +2800,14 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_enable label"
-msgid "Enable Support"
+msgid "Generate Support"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_enable description"
 msgid ""
-"Enable support structures. These structures support parts of the model with "
-"severe overhangs."
+"Generate structures to support parts of the model which have overhangs. "
+"Without these structures, such parts would collapse during printing."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2713,10 +2854,34 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "support_interface_extruder_nr description"
 msgid ""
-"The extruder train to use for printing the roofs and bottoms of the support. "
+"The extruder train to use for printing the roofs and floors of the support. "
 "This is used in multi-extrusion."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_roof_extruder_nr label"
+msgid "Support Roof Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_extruder_nr description"
+msgid ""
+"The extruder train to use for printing the roofs of the support. This is "
+"used in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_extruder_nr label"
+msgid "Support Floor Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_extruder_nr description"
+msgid ""
+"The extruder train to use for printing the floors of the support. This is "
+"used in multi-extrusion."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_type label"
 msgid "Support Placement"
@@ -2918,7 +3083,21 @@ msgctxt "support_bottom_stair_step_height description"
 msgid ""
 "The height of the steps of the stair-like bottom of support resting on the "
 "model. A low value makes the support harder to remove, but too high values "
-"can lead to unstable support structures."
+"can lead to unstable support structures. Set to zero to turn off the stair-"
+"like behaviour."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_stair_step_width label"
+msgid "Support Stair Step Maximum Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_stair_step_width description"
+msgid ""
+"The maximum width of the steps of the stair-like bottom of support resting "
+"on the model. A low value makes the support harder to remove, but too high "
+"values can lead to unstable support structures."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2959,6 +3138,30 @@ msgid ""
 "the bottom of the support, where it rests on the model."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_roof_enable label"
+msgid "Enable Support Roof"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_enable description"
+msgid ""
+"Generate a dense slab of material between the top of support and the model. "
+"This will create a skin between the model and support."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_enable label"
+msgid "Enable Support Floor"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_enable description"
+msgid ""
+"Generate a dense slab of material between the bottom of the support and the "
+"model. This will create a skin between the model and support."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_interface_height label"
 msgid "Support Interface Thickness"
@@ -2985,14 +3188,14 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_bottom_height label"
-msgid "Support Bottom Thickness"
+msgid "Support Floor Thickness"
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "support_bottom_height description"
 msgid ""
-"The thickness of the support bottoms. This controls the number of dense "
-"layers are printed on top of places of a model on which support rests."
+"The thickness of the support floors. This controls the number of dense "
+"layers that are printed on top of places of a model on which support rests."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3003,10 +3206,10 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "support_interface_skip_height description"
 msgid ""
-"When checking where there's model above the support, take steps of the given "
-"height. Lower values will slice slower, while higher values may cause normal "
-"support to be printed in some places where there should have been support "
-"interface."
+"When checking where there's model above and below the support, take steps of "
+"the given height. Lower values will slice slower, while higher values may "
+"cause normal support to be printed in some places where there should have "
+"been support interface."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3017,21 +3220,57 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "support_interface_density description"
 msgid ""
-"Adjusts the density of the roofs and bottoms of the support structure. A "
+"Adjusts the density of the roofs and floors of the support structure. A "
 "higher value results in better overhangs, but the supports are harder to "
 "remove."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "support_interface_line_distance label"
-msgid "Support Interface Line Distance"
+msgctxt "support_roof_density label"
+msgid "Support Roof Density"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_density description"
+msgid ""
+"The density of the roofs of the support structure. A higher value results in "
+"better overhangs, but the supports are harder to remove."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_line_distance label"
+msgid "Support Roof Line Distance"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "support_interface_line_distance description"
+msgctxt "support_roof_line_distance description"
 msgid ""
-"Distance between the printed support interface lines. This setting is "
-"calculated by the Support Interface Density, but can be adjusted separately."
+"Distance between the printed support roof lines. This setting is calculated "
+"by the Support Roof Density, but can be adjusted separately."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_density label"
+msgid "Support Floor Density"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_density description"
+msgid ""
+"The density of the floors of the support structure. A higher value results "
+"in better adhesion of the support on top of the model."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_line_distance label"
+msgid "Support Floor Line Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_line_distance description"
+msgid ""
+"Distance between the printed support floor lines. This setting is calculated "
+"by the Support Floor Density, but can be adjusted separately."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3076,6 +3315,86 @@ msgctxt "support_interface_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_roof_pattern label"
+msgid "Support Roof Pattern"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_pattern description"
+msgid "The pattern with which the roofs of the support are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_pattern option lines"
+msgid "Lines"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_pattern option grid"
+msgid "Grid"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_pattern option triangles"
+msgid "Triangles"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_pattern option concentric"
+msgid "Concentric"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_pattern option concentric_3d"
+msgid "Concentric 3D"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_roof_pattern option zigzag"
+msgid "Zig Zag"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_pattern label"
+msgid "Support Floor Pattern"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_pattern description"
+msgid "The pattern with which the floors of the support are printed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_pattern option lines"
+msgid "Lines"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_pattern option grid"
+msgid "Grid"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_pattern option triangles"
+msgid "Triangles"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_pattern option concentric_3d"
+msgid "Concentric 3D"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_use_towers label"
 msgid "Use Towers"
@@ -3133,6 +3452,20 @@ msgctxt "platform_adhesion description"
 msgid "Adhesion"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "prime_blob_enable label"
+msgid "Enable Prime Blob"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_blob_enable description"
+msgid ""
+"Whether to prime the filament with a blob before printing. Turning this "
+"setting on will ensure that the extruder will have material ready at the "
+"nozzle before printing. Printing Brim or Skirt can act like priming too, in "
+"which case turning this setting off saves some time."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_x label"
 msgid "Extruder Prime X Position"
@@ -3918,6 +4251,66 @@ msgid ""
 "lower order and normal meshes."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "cutting_mesh label"
+msgid "Cutting Mesh"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "cutting_mesh description"
+msgid ""
+"Limit the volume of this mesh to within other meshes. You can use this to "
+"make certain areas of one mesh print with different settings and with a "
+"whole different extruder."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mold_enabled label"
+msgid "Mold"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mold_enabled description"
+msgid ""
+"Print models as a mold, which can be cast in order to get a model which "
+"resembles the models on the build plate."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mold_width label"
+msgid "Minimal Mold Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mold_width description"
+msgid ""
+"The minimal distance between the ouside of the mold and the outside of the "
+"model."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mold_roof_height label"
+msgid "Mold Roof Height"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mold_roof_height description"
+msgid "The height above horizontal parts in your model which to print mold."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mold_angle label"
+msgid "Mold Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mold_angle description"
+msgid ""
+"The angle of overhang of the outer walls created for the mold. 0° will make "
+"the outer shell of the mold vertical, while 90° will make the outside of the "
+"model follow the contour of the model."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_mesh label"
 msgid "Support Mesh"
@@ -3930,6 +4323,18 @@ msgid ""
 "structure."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_mesh_drop_down label"
+msgid "Drop Down Support Mesh"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_mesh_drop_down description"
+msgid ""
+"Make support everywhere below the support mesh, so that there's no overhang "
+"in the support mesh."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "anti_overhang_mesh label"
 msgid "Anti Overhang Mesh"
@@ -3982,8 +4387,21 @@ msgctxt "magic_spiralize description"
 msgid ""
 "Spiralize smooths out the Z move of the outer edge. This will create a "
 "steady Z increase over the whole print. This feature turns a solid model "
-"into a single walled print with a solid bottom. This feature used to be "
-"called Joris in older versions."
+"into a single walled print with a solid bottom. This feature should only be "
+"enabled when each layer only contains a single part."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "smooth_spiralized_contours label"
+msgid "Smooth Spiralized Contours"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "smooth_spiralized_contours description"
+msgid ""
+"Smooth the spiralized contours to reduce the visibility of the Z seam (the Z-"
+"seam should be barely visible on the print but will still be visible in the "
+"layer view). Note that smoothing will tend to blur fine surface details."
 msgstr ""
 
 #: fdmprinter.def.json