S5 global settings fixes

Fixes as suggested by Diego

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg

@@ -15,7 +15,6 @@ variant = AA 0.4
 material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 skin_overlap = 20
 speed_print = 60
 speed_layer_0 = 20

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg

@@ -16,7 +16,6 @@ cool_min_speed = 7
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 speed_print = 60
 speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 60)

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg

@@ -18,7 +18,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 speed_print = 50
 speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 50)

resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg

@@ -16,7 +16,6 @@ machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 speed_print = 55
 speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 55)

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg

@@ -41,7 +41,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
-retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg

@@ -41,7 +41,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
-retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15

resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -40,7 +40,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
-retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg

@@ -17,14 +17,12 @@ cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_line_width = =round(line_width * 0.65 / 0.75, 2)
-infill_pattern = triangles
 line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 support_angle = 70
 support_line_width = =line_width * 0.75

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -17,15 +17,12 @@ cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_line_width = =round(line_width * 0.65 / 0.75, 2)
-infill_pattern = triangles
-layer_height = 0.4
 line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
-material_standby_temperature = 100
 prime_tower_enable = True
 raft_margin = 10
 support_angle = 70

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg

@@ -17,15 +17,12 @@ cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
 infill_line_width = =round(line_width * 0.65 / 0.75, 2)
-infill_pattern = triangles
-layer_height = 0.3
 line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 support_angle = 70
 support_line_width = =line_width * 0.75