Elegoo Neptune series Printer Configuration

These are the config files that add the Neptune series from Elegoo.

resources/definitions/elegoo_base.def.json

@@ -0,0 +1,134 @@
+
+{
+  "version": 2,
+
+  "name": "ELEGOO Base Printer",
+
+  "inherits": "fdmprinter",   
+
+  "metadata": {
+      "author": "NARUTO",
+      "manufacturer": "ELEGOO",
+      "file_formats": "text/x-gcode",
+      "platform": "elegoo_platform.3mf",
+      "platform_offset": [-2.2, 14.5, -31],
+      "has_machine_quality": true,
+      "preferred_quality_type": "fine",
+      "preferred_material": "generic_pla_175",
+      "machine_extruder_trains":{"0": "elegoo_extruder_0"},
+      "exclude_materials": [
+        "generic_nylon_175",
+        "generic_nylon",
+        "generic_hips_175",
+        "generic_hips",
+        "generic_gffcpe",
+        "generic_bvoh_175",
+        "generic_ccfpe",
+        "generic_cffcpe",
+        "generic_cpe_plus",
+        "generic_cpe_175",
+        "generic_cpe",
+        "generic_tpu",
+        "generic_pp",
+        "generic_pc",
+        "generic_pc_175",
+        "generic_pvc",
+        "generic_pva",
+        "generic_pva_175",
+        "generic_pvc_175",
+        "generic_pp"
+        ]
+        },
+
+  "overrides": {
+         "machine_max_acceleration_x":{"value": 1000},
+         "machine_max_acceleration_y":{"value": 1000},
+         "machine_max_acceleration_e":{"value": 5000},
+         "machine_acceleration":{"value": 1000},
+         "machine_max_jerk_xy":{"value": 8.0},
+
+         "gantry_height": {"value": "machine_height-20"},
+         "material_initial_print_temperature":{"value": "material_print_temperature"},
+         "material_final_print_temperature":{"value": "material_print_temperature"},
+         "material_print_temperature_layer_0":{"value": "210 if material_print_temperature < 210 else material_print_temperature"},
+         "machine_heated_bed":{"default_value": true},
+         "material_diameter":{"value": 1.75},
+         "line_width":{"value":"machine_nozzle_size + 0.02"},
+         "wall_thickness":{"value":"wall_line_width_0 if magic_spiralize else line_width * 2"},
+         "retraction_hop":{"value": "layer_height if layer_height > 0.199 else 0.2"},
+         "fill_outline_gaps": {"default_value": false},
+
+         "acceleration_enabled":{"value": true},
+         "acceleration_print":{"value": 1000},
+         "acceleration_layer_0":{"value": 500},
+         "acceleration_travel":{"value": "acceleration_print"},
+         "speed_infill":{"value": "math.ceil(speed_wall + 35)"},
+         "speed_wall_x":{"value": "speed_wall + 15"},
+         "speed_topbottom":{"value": "speed_wall + 15"},
+         "speed_prime_tower":{"value": "speed_print if speed_print < 70.1 else 90 if speed_print > 100 else speed_print * 0.5+35"},
+         "speed_travel":{"value": "90 if speed_print < 60.1 else speed_print * 1.5 if speed_print > 90 else speed_print+30"},
+         "speed_layer_0":{"value": "speed_print * 20 / 60 if material_bed_temperature > 70 else speed_print * 30 / 60","maximum_value_warning": "60"},
+         "speed_travel_layer_0": {"value": "70 if speed_layer_0 < 20 else 90 if speed_layer_0 > 40 else speed_layer_0+50"},
+         "skirt_brim_speed":{"value": "speed_print_layer_0"},
+         "speed_support": {"value": "speed_print if speed_wall > 0 and speed_wall < 40.01 else speed_wall + 40 "},
+         "initial_layer_line_width_factor":{"value": "100.0 if resolveOrValue('adhesion_type') == 'raft' else 130 if line_width < 0.5 else 110"},
+         "optimize_wall_printing_order":{"default_value": true },
+         "z_seam_type":{"default_value": "back"},
+          "z_seam_corner":{"default_value": "z_seam_corner_weighted"},
+
+          "support_angle":{"value": "45 if speed_print > 99.9 else 50"},
+          "gradual_support_infill_step_height":{"value": "5"},
+          "support_infill_angles":{"default_value": "[65]"},
+          "support_brim_enable":{"value": "support_structure == 'normal' or support_structure == 'tree'"},
+          "support_brim_width":{"default_value": 3 ,"value" : "6 if support_structure == 'tree' else line_width * initial_layer_line_width_factor * 0.02 " },
+          "support_z_distance":{"value": "layer_height * 1.2 if (support_interface_enable and support_bottom_enable and layer_height < 0.16) or support_bottom_enable else layer_height"},
+          "support_top_distance":{"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'layer_height') + (0 if support_structure == 'tree' else 0)"},
+          "support_xy_distance":{"value": "machine_nozzle_size * 1.7"},
+          "support_xy_distance_overhang":{"value": "machine_nozzle_size * 1.2 if support_interface_enable else machine_nozzle_size * 0.8"},
+          "support_offset":{"default_value": 0.3},
+          "support_interface_density":{"default_value": 33.333},
+          "support_interface_pattern":{"default_value": "lines"},
+          "support_roof_pattern":{"value": "'grid'"},
+          "support_bottom_offset":{"value": "-0.4"},
+          "support_use_towers":{"default_value": false},
+          "support_tower_maximum_supported_diameter":{"value": "1"},
+          "support_material_flow":{"value": "material_flow * 0.95"},
+          "minimum_support_area":{"default_value": 3},
+          "minimum_interface_area": {"default_value": 10},
+
+          "brim_width":{"default_value": 5 },
+          "brim_gap":{"default_value": 0.1},
+          "cool_fan_full_at_height":{"value": "layer_height_0 if resolveOrValue('adhesion_type') == 'raft' else resolveOrValue('layer_height_0')+0.4"},
+          "retraction_combing":{"value": "'no_outer_surfaces' if (any(extruderValues('skin_monotonic')) or any(extruderValues('ironing_enabled')) or (any(extruderValues('roofing_monotonic')) and any(extruderValues('roofing_layer_count')))) else 'no_outer_surfaces'"},
+          "retraction_combing_max_distance":{"value": "(infill_line_distance)*1.5 + 5  "},
+          "infill_pattern":{"value": "'lines' if (infill_sparse_density > 35 or speed_print >= 80) else 'grid' "},
+          "infill_sparse_density":{"default_value": 15},
+          "zig_zaggify_infill":{"value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d' or infill_sparse_density < 30 "},
+          "z_seam_position": {"default_value": "left" },
+          "prime_tower_brim_enable":{"default_value": true},
+          "prime_tower_size":{"default_value": 30},
+          "prime_tower_min_volume":{ "value": "(layer_height) * (prime_tower_size / 2)**2 * 3 * 0.5 "},
+          "prime_tower_wipe_enabled":{"default_value": false},
+          "retraction_amount":{"default_value": 5},
+          "switch_extruder_retraction_amount":{"value": "15 if extruders_enabled_count > 1 else machine_heat_zone_length"},
+          "raft_margin":{ "default_value": 5},
+
+          "infill_overlap":{"value": "10 if infill_sparse_density < 20.01 else 5 if infill_sparse_density < 40.01 and infill_pattern != 'concentric' else 0"},
+          "infill_overlap_mm":{"value": "0.5 * (infill_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0)) * infill_overlap / 100"},
+          "min_infill_area":{"value": "5"},
+          "speed_slowdown_layers":{"value": "0 if resolveOrValue('adhesion_type') == 'raft' else speed_print / 30"},
+          "raft_base_thickness":{"value": "resolveOrValue('machine_nozzle_size') * 0.75"},
+          "raft_interface_thickness":{"value": "resolveOrValue('machine_nozzle_size') * 0.75"},
+          "raft_surface_fan_speed":{"value": "cool_fan_speed"},
+          "raft_surface_thickness":{"value": "resolveOrValue('machine_nozzle_size')*0.375"},
+          "raft_surface_line_width":{"value": "machine_nozzle_size * 1.25"},
+          "raft_speed":{"value": "30"},
+          "raft_interface_speed":{"value": "0.6 * raft_speed"},
+          "raft_base_speed":{"value": "0.4 * raft_speed"},
+
+          "cool_fan_speed":{"enabled": "resolveOrValue('cool_fan_enabled') == 'true' or cool_fan_enabled"},
+          "cool_fan_speed_min":{"enabled": "resolveOrValue('cool_fan_enabled') == 'true' or cool_fan_enabled"},
+          "cool_fan_speed_max":{"enabled": "resolveOrValue('cool_fan_enabled') == 'true' or cool_fan_enabled"},
+          "cool_fan_speed_0":{"value": "cool_fan_speed if resolveOrValue('adhesion_type') == 'raft' else 0","enabled": "resolveOrValue('cool_fan_enabled') == 'true' or cool_fan_enabled"}
+  }
+}

resources/definitions/elegoo_neptune_1.def.json

@@ -0,0 +1,28 @@
+{
+    "name":      "ELEGOO NEPTUNE",
+    "version":   2,
+    "inherits":  "elegoo_base",
+    "metadata":  {
+                  "author": "NARUTO",
+                  "visible": true,
+                  "quality_definition": "elegoo_base"
+                  },
+    "overrides": {
+                  "machine_name":   {"default_value": "ELEGOO NEPTUNE"},
+                  "machine_width":  {"default_value": 210},
+                  "machine_depth":  {"default_value": 210},
+                  "machine_height": {"default_value": 200},
+                  "machine_head_with_fans_polygon": { "value":  [ [-50, 20], [50, 20], [50, -25], [-50, -25] ] },
+
+                  "machine_start_gcode" : {
+                    "default_value": ";ELEGOO NEPTUNE\nG90\nG28 ;home\nG1 Z0.6 F100 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E20 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600.0 E40 ;Draw the second line\nG92 E0 ;Reset Extruder"
+                    },
+                  "machine_end_gcode" : {
+                    "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-10 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
+                    },
+                  
+                  "material_bed_temperature":{"value": "default_material_bed_temperature + 5"}
+                  
+                 }
+}
+

resources/definitions/elegoo_neptune_2s.def.json

@@ -0,0 +1,27 @@
+{
+    "name":      "ELEGOO NEPTUNE 2S",
+    "version":   2,
+    "inherits":  "elegoo_base",
+    "metadata":  {
+                  "author": "NARUTO",
+                  "visible": true,
+                  "quality_definition": "elegoo_base"
+                 },
+    "overrides": {
+                  "machine_name":   {"default_value": "ELEGOO NEPTUNE 2S"},
+                  "machine_width":  {"default_value": 235},
+                  "machine_depth":  {"default_value": 235},
+                  "machine_height": {"default_value": 260},
+                  "machine_head_with_fans_polygon": { "value":  [ [-55, 20], [55, 20], [55, -25], [-55, -25] ] },
+
+                  "machine_start_gcode" : {
+                    "default_value": ";ELEGOO NEPTUNE 2S\nG90\nG28 ;home\nG1 Z0.6 F100 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E20 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600.0 E40 ;Draw the second line\nG92 E0 ;Reset Extruder"
+                    },
+                  "machine_end_gcode" : {
+                    "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-10 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
+                    },
+                  
+                  "material_bed_temperature":{"value": "default_material_bed_temperature + 10"}
+              
+                 }
+}

resources/definitions/elegoo_neptune_3.def.json

@@ -0,0 +1,27 @@
+{
+    "name":      "ELEGOO NEPTUNE 3",
+    "version":   2,
+    "inherits":  "elegoo_base",
+    "metadata":  {
+                  "author": "NARUTO",
+                  "visible": true,
+                  "quality_definition": "elegoo_base"
+                 },
+    "overrides": {
+                  "machine_name":   {"default_value": "ELEGOO NEPTUNE 3"},
+                  "machine_width":  {"default_value": 235},
+                  "machine_depth":  {"default_value": 235},
+                  "machine_height": {"default_value": 280},
+                  "machine_head_with_fans_polygon": { "value":  [ [-55, 20], [55, 20], [55, -25], [-55, -25] ] },
+
+                  "machine_start_gcode" : {
+                    "default_value": ";ELEGOO NEPTUNE 3\n;M413 S0;S0=Disable power-loss recovery:S1=Enable power-loss recovery\nM220 S100 ;Set the feed speed to 100%\nG90\nG28 ;home\n;M420 S1 Z10;Uncomment to enable progressive compensation height of 10mm\nG92 E0 ;Reset Extruder\nG1 Z0.6 F100\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E20 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600 E40 ;Draw the second line\nG92 E0 ;Reset Extruder"
+                    },
+                  "machine_end_gcode" : {
+                    "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-10 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
+                    },
+
+                  "material_bed_temperature":{"value": "default_material_bed_temperature + 10"}
+
+                 }
+}

resources/definitions/elegoo_neptune_3max.def.json

@@ -0,0 +1,24 @@
+{
+    "name":      "ELEGOO NEPTUNE 3 Max",
+    "version":   2,
+    "inherits":  "elegoo_neptune_3pro",
+    "metadata":  {
+                  "platform_offset": [-2.1, -0.2, 0],
+                  "platform": "elegoo_platform_max.3mf"
+                 },
+    "overrides": {
+                  "machine_max_acceleration_x":{"value": 700},
+                  "machine_max_acceleration_y":{"value": 500},
+                  "machine_acceleration":{"value": 700},
+                  "machine_name":   {"default_value": "ELEGOO NEPTUNE 3 Max"},
+                  "machine_width":  {"default_value": 426},
+                  "machine_depth":  {"default_value": 426},
+                  "machine_height": {"default_value": 510},
+                  "acceleration_wall":{"value": 700},
+
+                  "machine_start_gcode" : {
+                    "default_value": ";ELEGOO NEPTUNE 3 Max\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nG90\nG28 ;home\n;M420 S1 Z10;Uncomment to enable progressive compensation height of 10mm\nG92 E0 ;Reset Extruder\nG1 Z0.45 F300\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E15 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600 E30 ;Draw the second line\nG92 E0 ;Reset Extruder"
+                    }
+
+                 }
+}

resources/definitions/elegoo_neptune_3plus.def.json

@@ -0,0 +1,23 @@
+{
+    "name":      "ELEGOO NEPTUNE 3 Plus",
+    "version":   2,
+    "inherits":  "elegoo_neptune_3pro",
+    "metadata":  {
+                  "platform_offset": [-2.1, -0.2, 0],
+                  "platform": "elegoo_platform_max.3mf"
+                 },
+    "overrides": {
+                  "machine_max_acceleration_x":{"value": 700},
+                  "machine_max_acceleration_y":{"value": 700},
+                  "machine_acceleration":{"value": 700},
+                  "machine_name":   {"default_value": "ELEGOO NEPTUNE 3 Plus"},
+                  "machine_width":  {"default_value": 330},
+                  "machine_depth":  {"default_value": 330},
+                  "machine_height": {"default_value": 410},
+                  "acceleration_wall":{"value": 700},
+
+                  "machine_start_gcode" : {
+                    "default_value": ";ELEGOO NEPTUNE 3 Plus\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nG90\nG28 ;home\n;M420 S1 Z10;Uncomment to enable progressive compensation height of 10mm\nG92 E0 ;Reset Extruder\nG1 Z0.45 F300\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E15 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600 E30 ;Draw the second line\nG92 E0 ;Reset Extruder"
+                    }
+                 }
+}

resources/definitions/elegoo_neptune_3pro.def.json

@@ -0,0 +1,35 @@
+{
+    "name":      "ELEGOO NEPTUNE 3 Pro",
+    "version":   2,
+    "inherits":  "elegoo_base",
+    "metadata":  {
+                  "author": "NARUTO",
+                  "visible": true,
+                  "quality_definition": "elegoo_base"
+                 },
+    "overrides": {
+                  "machine_name":   {"default_value": "ELEGOO NEPTUNE 3 Pro"},
+                  "machine_width":  {"default_value": 235},
+                  "machine_depth":  {"default_value": 235},
+                  "machine_height": {"default_value": 280},
+                  "machine_head_with_fans_polygon": { "value":  [ [-55, 30], [55, 30], [55, -35], [-55, -35] ] },
+                  "speed_travel":{"value": "150 if speed_print < 100 else speed_print * 1.5"},
+                  "speed_travel_layer_0": {"value": "100"},
+
+                  "machine_start_gcode" : {
+                    "default_value": ";ELEGOO NEPTUNE 3 Pro\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nG90\nG28 ;home\n;M420 S1 Z10;Uncomment to enable progressive compensation height of 10mm\nG92 E0 ;Reset Extruder\nG1 Z0.45 F300\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E15 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600 E30 ;Draw the second line\nG92 E0 ;Reset Extruder"
+                    },
+                  "machine_end_gcode" : {
+                    "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
+                    },
+
+                  "material_bed_temperature":{"value": "default_material_bed_temperature + 10"},
+                  "retraction_amount":{"value": 1},
+                  "retraction_speed":{"resolve": 25},
+                  "retraction_retract_speed":{"resolve": 25},
+                  "retraction_prime_speed":{"resolve": 25},
+                  "retraction_count_max":{"value": 80},
+                  "infill_overlap":{"value": "0 if infill_sparse_density < 40.01 and infill_pattern != 'concentric' else -5"}
+
+                 }
+}

resources/definitions/elegoo_neptune_x.def.json

@@ -0,0 +1,27 @@
+{
+    "name":      "ELEGOO NEPTUNE X",
+    "version":   2,
+    "inherits":  "elegoo_base",
+    "metadata":  {
+                  "author": "NARUTO",
+                  "visible": true,
+                  "quality_definition": "elegoo_base"
+                  },
+    "overrides": {
+                  "machine_name":   {"default_value": "ELEGOO NEPTUNE X"},
+                  "machine_width":  {"default_value": 235},
+                  "machine_depth":  {"default_value": 235},
+                  "machine_height": {"default_value": 310},
+                  "machine_head_with_fans_polygon": { "value":  [ [-55, 20], [55, 20], [55, -25], [-55, -25] ] },
+
+                  "machine_start_gcode" : {
+                    "default_value": ";ELEGOO NEPTUNE X\nG90\nG28 ;home\nG1 Z0.6 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E20 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600.0 E40 ;Draw the second line\nG92 E0 ;Reset Extruder"
+                    },
+                  "machine_end_gcode" : {
+                    "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-10 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
+                    },
+                  
+                  "material_bed_temperature":{"value": "default_material_bed_temperature + 5"}
+
+                 }
+}

resources/extruders/elegoo_extruder_0.def.json

@@ -0,0 +1,14 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "elegoo_base",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {"default_value": 0},
+        "material_diameter": { "default_value": 1.75 }
+    }
+}