Add acceleration_infill & acceleration_wall

Add acceleration_infill & acceleration_wall
and modify speed_travel

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg

@@ -23,11 +23,13 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
 support_infill_rate = 20
-adhesion_type = skirt
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg

@@ -23,11 +23,13 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
 support_infill_rate = 20
-adhesion_type = skirt
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg

@@ -23,11 +23,13 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
 support_infill_rate = 20
-adhesion_type = skirt
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0

resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg

@@ -23,11 +23,13 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
 support_infill_rate = 20
-adhesion_type = skirt
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0

resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg

@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15

resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg

@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15

resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg

@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15

resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg

@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15

resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg

@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 6.5
 retraction_speed = 20
 retraction_prime_speed = 15
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0

resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg

@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 6.5
 retraction_speed = 20
 retraction_prime_speed = 15
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0