Cartesio profiles update

Cartesio disalowed areas
Cartesio extruder offsets
Cartesio high quality profiles

resources/definitions/cartesio.def.json

@@ -50,11 +50,15 @@
         "prime_tower_wall_thickness": { "resolve": 0.7 },
         "prime_tower_position_x": { "default_value": 50 },
         "prime_tower_position_y": { "default_value": 150 },
+        "machine_max_feedrate_z": { "default_value": 20 },
+        "machine_disallowed_areas": { "default_value": [
+            [[215, 135], [-215, 135], [-215, 75], [215, 75]]
+        ]},
         "machine_start_gcode": {
             "default_value": "\nM92 E159 ;2288 for V5 extruder\n\nM104 S120 T1\nM104 S120 T2\nM104 S120 T3\n\nG21\nG90\nM42 S255 P13 ;chamber lights\nM42 S255 P12 ;fume extraction\nM204 S300 ;default acceleration\nM205 X10 ;default jerk\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature_layer_0}\n\nM117 Heating for 50 sec.\nG4 S20\nM117 Heating for 30 sec.\nG4 S20\nM117 Heating for 10 sec.\nM300 S1200 P1000\nG4 S9\n\nM117 purging nozzle....\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-1 F600\n\nM117 wiping nozzle....\nG1 X1 Y24 F3000\nG1 X70 F9000\nG1 Z10 F900\n\nM104 S21 T1\nM104 S21 T2\nM104 S21 T3\n\nM117 Printing .....\n"
         },
         "machine_end_gcode": {
-            "default_value": "; -- END GCODE --\nM106 S255\nM140 S5\nM104 S5 T0\nM104 S5 T1\nM104 S5 T2\nM104 S5 T3\n\nG91\nG1 Z1 F900\nG90\n\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\nT0\n; -- end of GCODE --"
+            "default_value": "; -- END GCODE --\nM117 cooling down....\nM106 S255\nM140 S5\nM104 S5 T0\nM104 S5 T1\nM104 S5 T2\nM104 S5 T3\n\nG91\nG1 Z1 F900\nG90\n\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\nT0\nM117 Finished.\n; -- end of GCODE --"
         },
         "layer_height": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" },
         "layer_height_0": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" },

resources/extruders/cartesio_extruder_2.def.json

@@ -14,7 +14,7 @@
             "maximum_value": "3"
         },
         "machine_nozzle_offset_x": { "default_value": 0.0 },
-        "machine_nozzle_offset_y": { "default_value": 60.0 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
         "machine_extruder_start_code": {
           "default_value": "\n;start extruder_2\n\nM117 printing\n"
         },

resources/extruders/cartesio_extruder_3.def.json

@@ -13,8 +13,8 @@
             "default_value": 3,
             "maximum_value": "3"
         },
-        "machine_nozzle_offset_x": { "default_value": 24.0 },
-        "machine_nozzle_offset_y": { "default_value": 60.0 },
+        "machine_nozzle_offset_x": { "default_value": 0.0 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
         "machine_extruder_start_code": {
           "default_value": "\n;start extruder_3\n\nM117 printing\n"
         },

resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg

@@ -35,7 +35,7 @@ speed_print = 50
 speed_infill = =speed_print
 speed_layer_0 = =round(speed_print / 5 * 4)
 speed_wall = =round(speed_print / 2)
-speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_wall_0 = =10 if speed_wall < 11 else 15
 speed_topbottom = =round(speed_print / 5 * 4)
 speed_travel = =round(speed_print if magic_spiralize else 150)
 speed_travel_layer_0 = =speed_travel

resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg

@@ -35,7 +35,7 @@ speed_print = 50
 speed_infill = =speed_print
 speed_layer_0 = =round(speed_print / 5 * 4)
 speed_wall = =round(speed_print / 2)
-speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_wall_0 = =10 if speed_wall < 11 else 15
 speed_topbottom = =round(speed_print / 5 * 4)
 speed_travel = =round(speed_print if magic_spiralize else 150)
 speed_travel_layer_0 = =speed_travel

resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg

@@ -35,7 +35,7 @@ speed_print = 50
 speed_infill = =speed_print
 speed_layer_0 = =round(speed_print / 5 * 4)
 speed_wall = =round(speed_print / 2)
-speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_wall_0 = =10 if speed_wall < 11 else 15
 speed_topbottom = =round(speed_print / 5 * 4)
 speed_travel = =round(speed_print if magic_spiralize else 150)
 speed_travel_layer_0 = =speed_travel

resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg

@@ -35,7 +35,7 @@ speed_print = 25
 speed_infill = =speed_print
 speed_layer_0 = =round(speed_print / 5 * 4)
 speed_wall = =round(speed_print / 2)
-speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_wall_0 = =10 if speed_wall < 11 else 15
 speed_topbottom = =round(speed_print / 5 * 4)
 speed_travel = =round(speed_print if magic_spiralize else 150)
 speed_travel_layer_0 = =speed_travel

resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg

@@ -35,7 +35,7 @@ speed_print = 50
 speed_infill = =speed_print
 speed_layer_0 = =round(speed_print / 5 * 4)
 speed_wall = =round(speed_print / 2)
-speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_wall_0 = =10 if speed_wall < 11 else 15
 speed_topbottom = =round(speed_print / 5 * 4)
 speed_travel = =round(speed_print if magic_spiralize else 150)
 speed_travel_layer_0 = =speed_travel

resources/quality/cartesio/hips/cartesio_0.4_hips_high.inst.cfg

@@ -35,7 +35,7 @@ speed_print = 50
 speed_infill = =speed_print
 speed_layer_0 = =round(speed_print / 5 * 4)
 speed_wall = =round(speed_print / 2)
-speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_wall_0 = =10 if speed_wall < 11 else 15
 speed_topbottom = =round(speed_print / 5 * 4)
 speed_travel = =round(speed_print if magic_spiralize else 150)
 speed_travel_layer_0 = =speed_travel

resources/quality/cartesio/hips/cartesio_0.8_hips_high.inst.cfg

@@ -35,7 +35,7 @@ speed_print = 50
 speed_infill = =speed_print
 speed_layer_0 = =round(speed_print / 5 * 4)
 speed_wall = =round(speed_print / 2)
-speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_wall_0 = =10 if speed_wall < 11 else 15
 speed_topbottom = =round(speed_print / 5 * 4)
 speed_travel = =round(speed_print if magic_spiralize else 150)
 speed_travel_layer_0 = =speed_travel