Merge pull request #7996 from eMotion-Tech/master

New_fixed_Strateo3D_pull_request

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_A.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_absx
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 19 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_absx
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 96
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_absx
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 91
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg

@@ -31,7 +31,7 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 19 * layer_height
 cool_min_speed = 10
 support_angle = 65
-material_print_temperature = =default_material_print_temperature
+material_print_temperature = =default_material_print_temperature + 1
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 100
 retraction_extra_prime_amount = 0.1

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg

@@ -31,8 +31,8 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 cool_min_speed = 10
 support_angle = 60
-material_print_temperature = =default_material_print_temperature + 5
-material_print_temperature_layer_0 = =default_material_print_temperature
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 1
 material_flow = 96
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg

@@ -31,8 +31,8 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 cool_min_speed = 10
 support_angle = 55
-material_print_temperature = =default_material_print_temperature + 10
-material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature +3
 material_flow = 91
 retraction_extra_prime_amount = 0.1
 retraction_min_travel = =3*line_width

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg → resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_A.inst.cfg

@@ -8,7 +8,7 @@ setting_version = 15
 type = quality
 quality_type = a
 weight = 1
-material = emotiontech_pva-oks
+material = emotiontech_bvoh
 variant = Standard 0.4
 
 [values]

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg → resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_B.inst.cfg

@@ -8,7 +8,7 @@ setting_version = 15
 type = quality
 quality_type = b
 weight = 0
-material = emotiontech_pva-oks
+material = emotiontech_bvoh
 variant = Standard 0.4
 
 [values]

resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg → resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_C.inst.cfg

@@ -8,7 +8,7 @@ setting_version = 15
 type = quality
 quality_type = c
 weight = -1
-material = emotiontech_pva-oks
+material = emotiontech_bvoh
 variant = Standard 0.4
 
 [values]

resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_absx
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 37/50)
+speed_wall_0 = =math.ceil(speed_wall * 27/43)
+speed_topbottom = =math.ceil(speed_print * 33/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True