Removed PLA filter from Method X and Method XL.

Changed setting support_infill_density_multiplier_layer_0 to support_infill_density_multiplier_initial_layer.
Added Tough PLA to the MaterialOutputModel.py so it is recognised by Cura.

PP-475

cura/PrinterOutput/Models/MaterialOutputModel.py

@@ -39,7 +39,8 @@ class MaterialOutputModel(QObject):
                             "bvoh"      :{"name" :"BVOH"          ,"guid": "923e604c-8432-4b09-96aa-9bbbd42207f4"},
                             "cpe"       :{"name" :"CPE"           ,"guid": "da1872c1-b991-4795-80ad-bdac0f131726"},
                             "hips"      :{"name" :"HIPS"          ,"guid": "a468d86a-220c-47eb-99a5-bbb47e514eb0"},
-                            "tpu"       :{"name" :"TPU 95A"       ,"guid": "19baa6a9-94ff-478b-b4a1-8157b74358d2"}
+                            "tpu"       :{"name" :"TPU 95A"       ,"guid": "19baa6a9-94ff-478b-b4a1-8157b74358d2"},
+                            "im-pla"    :{"name": "Tough"         ,"guid": "de031137-a8ca-4a72-bd1b-17bb964033ad"}
                         }
 
 

resources/definitions/ultimaker_methodx.def.json

@@ -36,7 +36,6 @@
             "polywood_pla",
             "redd_",
             "tizyx_",
-            "ultimaker_pla_175",
             "ultimaker_tough_pla_175",
             "verbatim_",
             "Vertex_",

resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg

@@ -60,7 +60,7 @@ support_bottom_wall_count = 2
 support_conical_angle = 20
 support_conical_min_width = 20
 support_fan_enable = False
-support_infill_density_multiplier_layer_0 = 2
+support_infill_density_multiplier_initial_layer = 2
 support_infill_rate = 12
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_enable = True

resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg

@@ -60,7 +60,7 @@ support_bottom_wall_count = 2
 support_conical_angle = 20
 support_conical_min_width = 20
 support_fan_enable = False
-support_infill_density_multiplier_layer_0 = 2
+support_infill_density_multiplier_initial_layer = 2
 support_infill_rate = 12
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_enable = True

resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg

@@ -60,7 +60,7 @@ support_bottom_wall_count = 2
 support_conical_angle = 20
 support_conical_min_width = 20
 support_fan_enable = False
-support_infill_density_multiplier_layer_0 = 2
+support_infill_density_multiplier_initial_layer = 2
 support_infill_rate = 12
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
 support_interface_enable = True