raft interface line spacing can follow default

This is a non critical setting, just follow the default defined in fdmprinter. PP-243

resources/definitions/ultimaker3.def.json

@@ -113,7 +113,6 @@
         "prime_tower_enable": { "default_value": true },
         "raft_airgap": { "value": "0" },
         "raft_base_thickness": { "value": "0.3" },
-        "raft_interface_line_spacing": { "value": "0.5" },
         "retraction_amount": { "value": "6.5" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },

resources/definitions/ultimaker_s3.def.json

@@ -103,7 +103,6 @@
         "raft_airgap": { "value": "0" },
         "raft_base_speed": { "value": "20" },
         "raft_base_thickness": { "value": "0.3" },
-        "raft_interface_line_spacing": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_speed": { "value": "25" },
         "retraction_amount": { "value": "6.5" },

resources/definitions/ultimaker_s5.def.json

@@ -104,7 +104,6 @@
         "raft_airgap": { "value": "0" },
         "raft_base_speed": { "value": "20" },
         "raft_base_thickness": { "value": "0.3" },
-        "raft_interface_line_spacing": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_speed": { "value": "25" },
         "retraction_amount": { "value": "6.5" },

resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg

@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)

resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg

@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)

resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg

@@ -24,7 +24,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)

resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg

@@ -24,7 +24,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)

resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg

@@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)

resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg

@@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)

resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg

@@ -22,7 +22,6 @@ infill_sparse_density = 25
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40