Add files via upload

resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = High Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = high
+material = generic_abs_cartesio_0.25_mm
+weight = 1
+
+[values]
+infill_line_width = 0.3
+
+wall_thickness = 1
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90

resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = Normal Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_abs_cartesio_0.25_mm
+weight = 2
+
+[values]
+infill_line_width = 0.3
+
+wall_thickness = 1
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90

resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = High Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = high
+material = generic_abs_cartesio_0.4_mm
+weight = 1
+
+[values]
+infill_line_width = 0.5
+
+wall_thickness = 1.2
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90

resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = Normal Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_abs_cartesio_0.4_mm
+weight = 2
+
+[values]
+infill_line_width = 0.5
+
+wall_thickness = 1.2
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90

resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = Coarse Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = coarse
+material = generic_abs_cartesio_0.8_mm
+weight = 3
+
+[values]
+infill_line_width = 0.9
+
+wall_thickness = 2.4
+top_bottom_thickness = =layer_height * 3
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90

resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = Extra Coarse Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = extra coarse
+material = generic_abs_cartesio_0.8_mm
+weight = 4
+
+[values]
+infill_line_width = 0.9
+
+wall_thickness = 2.4
+top_bottom_thickness = =layer_height * 3
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 25
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90

resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = High Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = high
+material = generic_abs_cartesio_0.8_mm
+weight = 1
+
+[values]
+infill_line_width = 0.9
+
+wall_thickness = 2.4
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90

resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = Normal Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_abs_cartesio_0.8_mm
+weight = 2
+
+[values]
+infill_line_width = 0.9
+
+wall_thickness = 2.4
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90

resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = High Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = high
+material = generic_hips_cartesio_0.25_mm
+weight = 1
+
+[values]
+infill_line_width = 0.3
+
+wall_thickness = 1
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90

resources/quality/cartesio/hips/cartesio_0.25_hips_normal.inst.cfg

@@ -0,0 +1,56 @@
+[general]
+version = 2
+name = Normal Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = normal
+material = generic_hips_cartesio_0.25_mm
+weight = 2
+
+[values]
+infill_line_width = 0.3
+
+wall_thickness = 1
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 50
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90