|
|
@@ -18,7 +18,7 @@
|
|
|
"default_value": "Alfawise U20"
|
|
|
},
|
|
|
"machine_start_gcode": {
|
|
|
- "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F6000 ;move Z to position 15.0 mm as fast as possible\nG92 E0 ;zero the extruded length\nG1 X0.0 Y0.0 F1000.0 ;go to edge of print area\nG1 X60.0 E9.0 F1000.0 ;intro line\nG1 X100.0 E21.5 F1000.0 ;intro line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --"
|
|
|
+ "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 X60.0 Z0 E9.0 F1000.0;intro line\nG1 X100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --"
|
|
|
},
|
|
|
"machine_end_gcode": {
|
|
|
"default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 ;move to the X-axis origin (Home)\nG0 Y280 F600 ;bring the bed to the front for easy print removal\nM84 ;turn off stepper motors\n; -- end of END GCODE --"
|
|
|
@@ -93,4 +93,4 @@
|
|
|
"default_value": 45
|
|
|
}
|
|
|
}
|
|
|
-}
|
|
|
+}
|
pinchies