|
|
@@ -0,0 +1,76 @@
|
|
|
+{
|
|
|
+ "version": 2,
|
|
|
+ "name": "MP Mini Delta",
|
|
|
+ "inherits": "fdmprinter",
|
|
|
+ "metadata": {
|
|
|
+ "author": "MPMD Facebook Group",
|
|
|
+ "manufacturer": "Monoprice",
|
|
|
+ "category": "Other",
|
|
|
+ "file_formats": "text/x-gcode",
|
|
|
+ "platform": "mp_mini_delta_platform.stl",
|
|
|
+ "supports_usb_connection": true,
|
|
|
+ "has_machine_quality": false,
|
|
|
+ "visible": true,
|
|
|
+ "platform_offset": [0, 0, 0],
|
|
|
+ "has_materials": true,
|
|
|
+ "has_variants": false,
|
|
|
+ "has_machine_materials": false,
|
|
|
+ "has_variant_materials": false,
|
|
|
+ "preferred_quality_type": "normal",
|
|
|
+ "machine_extruder_trains":
|
|
|
+ {
|
|
|
+ "0": "mp_mini_delta_extruder_0"
|
|
|
+ }
|
|
|
+ },
|
|
|
+
|
|
|
+ "overrides": {
|
|
|
+ "machine_start_gcode":
|
|
|
+ {
|
|
|
+ "default_value": ";MPMD Basic Calibration Tutorial: \n; https://www.thingiverse.com/thing:3892011 \n; \n; If you want to put calibration values in your \n; Start Gcode, put them here. \n; \n;If on stock firmware, at minimum, consider adding \n;M665 R here since there is a firmware bug. \n; \n; Calibration part ends here \n; \nG90 ; switch to absolute positioning \nG92 E0 ; reset extrusion distance \nG1 E20 F200 ; purge 20mm of filament to prime nozzle. \nG92 E0 ; reset extrusion distance \nG4 S5 ; Pause for 5 seconds to allow time for removing extruded filament \nG28 ; start from home position \nG1 E-6 F900 ; retract 6mm of filament before starting the bed leveling process \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for removing extruded filament \nG29 P2 Z0.28 ; Auto-level ; ADJUST Z higher or lower to set first layer height. Start with 0.02 adjustments. \nG1 Z30 ; raise Z 30mm to prepare for priming the nozzle \nG1 E5 F200 ; extrude 5mm of filament to help prime the nozzle just prior to the start of the print \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for cleaning the nozzle and build plate if needed "
|
|
|
+ },
|
|
|
+ "machine_end_gcode":
|
|
|
+ {
|
|
|
+ "default_value": "M107; \nM104 S0; turn off hotend heater \nM140 S0; turn off bed heater \nG91; Switch to use Relative Coordinates \nG1 E-2 F300; retract the filament a bit before lifting the nozzle to release some of the pressure \nG1 Z5 E-5 F4800; move nozzle up a bit and retract filament even more \nG28 X0; return to home positions so the nozzle is out of the way \nM84; turn off stepper motors \nG90; switch to absolute positioning \nM82; absolute extrusion mode"
|
|
|
+ },
|
|
|
+ "machine_width": { "default_value": 110 },
|
|
|
+ "machine_depth": { "default_value": 110 },
|
|
|
+ "machine_height": { "default_value": 120 },
|
|
|
+ "machine_heated_bed": { "default_value": true },
|
|
|
+ "machine_shape": { "default_value": "elliptic" },
|
|
|
+ "machine_center_is_zero": { "default_value": true },
|
|
|
+ "machine_nozzle_size": {
|
|
|
+ "default_value": 0.4,
|
|
|
+ "minimum_value": 0.10,
|
|
|
+ "maximum_value": 0.80
|
|
|
+ },
|
|
|
+ "layer_height": {
|
|
|
+ "default_value": 0.14,
|
|
|
+ "minimum_value": 0.04
|
|
|
+ },
|
|
|
+ "layer_height_0": {
|
|
|
+ "default_value": 0.21,
|
|
|
+ "minimum_value": 0.07
|
|
|
+ },
|
|
|
+ "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
|
|
|
+ "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
|
|
|
+ "material_bed_temperature_layer_0": { "value": "material_bed_temperature + 5" },
|
|
|
+ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
|
+ "machine_max_feedrate_x": { "default_value": 150 },
|
|
|
+ "machine_max_feedrate_y": { "default_value": 150 },
|
|
|
+ "machine_max_feedrate_z": { "default_value": 150 },
|
|
|
+ "machine_max_feedrate_e": { "default_value": 50 },
|
|
|
+ "machine_max_acceleration_x": { "default_value": 800 },
|
|
|
+ "machine_max_acceleration_y": { "default_value": 800 },
|
|
|
+ "machine_max_acceleration_z": { "default_value": 800 },
|
|
|
+ "machine_max_acceleration_e": { "default_value": 10000 },
|
|
|
+ "machine_acceleration": { "default_value": 3000 },
|
|
|
+ "machine_max_jerk_xy": { "default_value": 20 },
|
|
|
+ "machine_max_jerk_z": { "default_value": 20 },
|
|
|
+ "machine_max_jerk_e": { "default_value": 5},
|
|
|
+ "retraction_amount": { "default_value": 4 },
|
|
|
+ "retraction_speed": { "default_value": 50 },
|
|
|
+ "retraction_hop_enabled": { "default_value": false },
|
|
|
+ "retract_at_layer_change": { "default_value": true },
|
|
|
+ "coasting_enable": { "default_value": true }
|
|
|
+ }
|
|
|
+}
|
Kostas Karmas